ANNOUNCEMENT - The community will be down for maintenace this Thursday August 13 from 12:00 AM PT to 02:00 AM PT. As a precaution save your work.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
281
Views
0
Helpful
4
Replies
Highlighted
Beginner

Forward voicemail back to original extension

I have a request to forward a line after no one has picked up to a different extension but if that person doesn't pick up have the original forwarding extension pickup.

In Short;

extension 1111 forward to 2222 if no answer

if there is no answer on extension after being forwarded to 2222 forward back to voicemail back to extension 1111

Both extensions currently have voicemail configured and we are running CUCM 10.5 and CUC 10.5

Any suggestions are greatly appreciated

Thanks,

Nick

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Hall of Fame Community Legend

Hi Nick,

Hi Nick,

Unity Connection should work this way by default. If you set the FNA on 1111 to roll to 2222 on no answer and then set the FNA on 2222 to roll to your voicemail pilot on no answer the call will eventually end up receiving the greeting for 1111 on end up in the 1111 mailbox. The only way this won't work is if you've changed the Advanced setting in Unity Connection from "use original dialed number" to "use last redirecting number."

Cheers!

Rob

View solution in original post

4 REPLIES 4
Highlighted
Hall of Fame Community Legend

Hi Nick,

Hi Nick,

Unity Connection should work this way by default. If you set the FNA on 1111 to roll to 2222 on no answer and then set the FNA on 2222 to roll to your voicemail pilot on no answer the call will eventually end up receiving the greeting for 1111 on end up in the 1111 mailbox. The only way this won't work is if you've changed the Advanced setting in Unity Connection from "use original dialed number" to "use last redirecting number."

Cheers!

Rob

View solution in original post

Highlighted
Beginner

Thanks! It was just as you

Thanks! It was just as you described

Thanks again,

Nick

Highlighted
Hall of Fame Cisco Employee

Unless you have changed the

Unless you have changed the default CUC configuration, that's the behavior you'll see. The original called number is used to choose the mailbox, not the last redirecting (unless you change the default config to have the latter)

Have you tried this??

HTH

java

if this helps, please rate
Highlighted
Hall of Fame Community Legend

Hi Nick,

Hi Nick,

You are most welcome my friend! Glad you got it sorted.

Cheers!

Rob

This widget could not be displayed.