cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
223
Views
0
Helpful
1
Replies
Highlighted

FXO Busy Notification for Users

Hi,

My client has migrated from the legacy key system to Cisco CUCME. He is used to seeing the red lights on the phone indicating the busy FXO lines. Hes asking for similar notification in Cisco CME. Is there any way to achieve this? I was thinking of something like presence for the FXO ports...

 

Regards

Saif

1 REPLY 1
Highlighted
Rising star

Hi Saifuddin,
You have to bind a analog line directly to the DN respectively button on the phone. Below an example:

 

voice-port 0/0/0
trunk-group FXO_ALL
connection plar opx 5001
caller-id enable

 

dial-peer voice 1000 pots
destination-pattern 1000
port 0/0/0

 

ephone-dn 1 dual-line
number 5001
label Line1
trunk 1000 monitor-port 0/0/0

 

ephone 1
mac-address nnnn.nnnn.nnnn
type 7965
button 1:1

 

Regards

__________________________________________________
Please remember to rate useful posts clicking on the stars below.
LinkedIn Profile: do.linkedin.com/in/leosalcie
Content for Community-Ad