cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
693
Views
5
Helpful
1
Replies

FXO port on ISR 4331 strip first digit Incoming calls

Joe Ank
Beginner
Beginner

Hello Everybody,

We have installed ISR 4331K9 as Voice Gateway, with 3 FXO Cards (4 ports)

we have an issue that when someone make a call from PSTN to these FXO lines, the IP Phone displays just Nine Digits.

the Caller ID's like 06XXXXXXXX, the IP Phone displays just 6XXXXXXXX.

This is an example of my FXO port's Config :

voice-port 0/1/0
cptone FR
timeouts interdigit 2
connection plar opx 104
impedance complex2
caller-id enable

Thank you in advance for your help

1 Accepted Solution

Accepted Solutions

Take  debug voice ccapi inout, verify the caller ID telco sending.if telco is providing you caller-ID 06XXXXXXXX, Check both CUCM and gateway if any translations applied.

 

 

 



Response Signature


View solution in original post

1 Reply 1

Take  debug voice ccapi inout, verify the caller ID telco sending.if telco is providing you caller-ID 06XXXXXXXX, Check both CUCM and gateway if any translations applied.

 

 

 



Response Signature


Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: