cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
447
Views
0
Helpful
2
Replies
Reyad Safi
Beginner

FXO with Unity

Hi All

i have a site connected to the PSTN through FXO CARD , when i configure the plar on the router as normal ip phone the line become onhook and after i disconnect the call , the port become offhook without any problem , BUT when i configure the plar to Auto Attendant (Cisco Unity Express) the port become onhook , but when i disconnect the call it keep onhook for 30 seconds , so how can i minimize this perioed

the voice port configuration is

voice-port 0/0/2

supervisory disconnect dualtone mid-call

cptone BR

timeouts call-disconnect 3

timeouts wait-release 1

connection plar opx 6668

caller-id enable

caller-id alerting line-reversal

caller-id alerting dsp-pre-allocate

please help

2 REPLIES 2
Reyad Safi
Beginner

Dears

please help

Reyad,

Try these n he voice-port config :

timeouts call-disconnect 5

timeouts wait-release 5

timing hookflash-out 500

Amer

Create
Recognize Your Peers
Content for Community-Ad