Gateways types when register with h323 Gatekeeper

[ahmad_tamneh]

When we talked about the type of the gateway (as endpoint) that can register with cisco gatekeeper, the gateway can be register as one of the following types

VOIP-GW

H323-GW

TERMENAL

below the output of the command sh gatekeeper endpoint

My question here is what is the differance between each type of them and when we used each type of them??

orpHQ#sh gatekeeper endpoints

                    GATEKEEPER ENDPOINT REGISTRATION

                    ================================

CallSignalAddr  Port  RASSignalAddr   Port  Zone Name         Type    Flags

--------------- ----- --------------- ----- ---------         ----    -----

192.168.10.25   1720  192.168.10.25   33138 SEA              TERM   

    H323-ID: TRUNK_GK_HQ_1

192.168.35.1    1720  192.168.35.1    60024 AMS               VOIP-GW

    E164-ID: 3000

    E164-ID: 3001

    H323-ID: CME

    Voice Capacity Max.=  Avail.=  Current.= 0

192.168.10.177  1720  192.168.10.177  54020 CUBE              H323-GW

    H323-ID: CUBE

    Voice Capacity Max.=  Avail.=  Current.= 0

Total number of active registrations = 3 orpHQ#sh gatekeeper endpoints
                   

[Roger Kallberg]

The answer to your question can be found with very little effort, have you even tried to google it?

Look at this page from my good friend Matthew Barry aka ciscovoiceguru, http://ciscovoiceguru.com/309/gateway-reg-type/

Sent from Cisco Technical Support iPhone App

[ahmad_tamneh]

I saw it already,

How about terminal.

[Roger Kallberg]

The type Terminal is used by end-points that register to a gatekeeper. For example a video conferens system.

Sent from Cisco Technical Support iPhone App