getting mention error not able to do out calls

[Vijay Patil]

*Feb  9 05:43:47.780 UTC: ISDN Se0/2/0:15 Q931: TX -> SETUP pd = 8  callref = 0x0087
        Bearer Capability i = 0x8890
                Standard = CCITT
                Transfer Capability = Unrestricted Digital
                Transfer Mode = Circuit
                Transfer Rate = 64 kbit/s
        Channel ID i = 0xA9839F
                Exclusive, Channel 31
        Called Party Number i = 0x80, '009819640411'
                Plan:Unknown, Type:Unknown
*Feb  9 05:43:47.972 UTC: ISDN Se0/2/0:15 Q931: RX <- SETUP_ACK pd = 8  callref = 0x8087
        Channel ID i = 0xA9839F
                Exclusive, Channel 31
*Feb  9 05:43:47.976 UTC: ISDN Se0/2/0:15 **ERROR**: call_setup_ack_proceeding: NO HDLC available b channel 30 call id 0x8008
*Feb  9 05:43:47.976 UTC: ISDN Se0/2/0:15 Q931: TX -> DISCONNECT pd = 8  callref = 0x0087
        Cause i = 0x80A2 - No circuit/channel available
*Feb  9 05:43:48.172 UTC: ISDN Se0/2/0:15 Q931: RX <- RELEASE pd = 8  callref = 0x8087
        Cause i = 0x8295 - Call rejected
*Feb  9 05:43:48.176 UTC: ISDN Se0/2/0:15 Q931: TX -> RELEASE_COMP pd = 8  callref = 0x0087
 

[Aman Soi]

Hi Vijay,

seems that there are no channels availble for dialing out.

from the router show isdn service to check OutofService/Inservice channels.

rgeds,

aman

[Jaime Valencia]

If your PRI does not support video calls, set the bearer capability to speech.