Graceful Gateway Restart

[Frankaviglia]

Good afternoon all,

anybody can suggest the best wey to gracefully restart a Gateway inside a Route Group.

The Route Group has 2 GW so idealy we would like to issue a command that would move all new calls to the other GW and as soon as existing calls are terminated on the first one, restart it or shut it down.

The 2 GWs are MGCP controlled.

Thank you for your advice,

F

[Daniele Giordano · Accepted solution]

I use this trick. During low traffic hours I use the command "mgcp block-newcalls" on the gateway. Then I schedule a night reload with "reload in" command.

Regards.

[Frankaviglia]

That's exactly what I needed.

This way I can keep monitoring new calls coming in and reboot when the router is empty.

I believe it was made on purpose for these cases.

Thanks,

Francesco