cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Walkthrough Wednesdays
204
Views
5
Helpful
1
Replies
Nishad Ismail
Beginner

GUI CME error "No free phone sequence number"

CME allowed login and changes in the GUI ,Except phone and dn

 

When i click on add gives error " "No free phone sequence number"

 

Cisco Voice Gateway 4351 ,CME 12.1 ,Cisco Phone 7821(SIP Phones)

 

Below the config

--------------------------

!
voice register global
mode cme
source-address 10.10.10.1 port 5060
max-dn 300
max-pool 150
load 7821 sip78xx.12-1-1-12
load 8851 sip88xx.12-1-1-12
authenticate register
authenticate realm all
tftp-path flash:
create profile sync 0054123122275463
ntp-server 10.10.10.1 mode directedbroadcast
auto-register
password 1234
auto-assign 100 to 199
!
!------------------

ip http server
ip http authentication local
ip http secure-server
ip http path flash:/GUI/CME-GUI-12.1
ip tftp source-interface GigabitEthernet0

--------------

telephony-service
system message CME
time-format 24
max-conferences 8 gain -6
web admin system name admin secret 5 $1$xRN4$.
web admin customer name cust secret 5 $1$q66d.
dn-webedit
time-webedit
transfer-system full-consult
directory entry 9 200 name Test
!

1 REPLY 1
Nithin Eluvathingal
VIP Advisor

Because you haven't configured max dn and Max ephones under Telephony service. GUI phone configuration support only SCCP.

 

 

Please Rate all useful post :)
If this answered your question, please click "ACCEPT AS SOLUTION" Or If you find this response useful, please mark it as "HELPFUL"
Content for Community-Ad

Spotlight Awards 2021