09-25-2012 10:28 AM - edited 03-16-2019 01:23 PM
Hello,
is there a way to create a dial-peer that forwards all calls to an external number? PRI on a 2801 router doing H.323 and running CME 7.1
Thanks. Replies rated.
09-25-2012 10:50 AM
Hello Scott, what you wanna do? ex:
Someone call at extension 5555 and the call is forward to a cell phone number?
regards
Leonardo Santana
09-25-2012 01:18 PM
Hello,
there is a fax machine down and the need is to forward that fax number off-site to another fax machine.
09-25-2012 01:37 PM
You can use a translation rule to replace the number:
voice translation-rule 1
rule 1 /5555/ /PSTN NUMBER/
And create a translation profifle and apply to your correct dial-peer:
voice translation-profile profile1 translate called 1 dial-peer voice 10 pots translation-profile outgoing profile1
But you need to test if the fax transmition will suceed!
http://www.cisco.com/en/US/tech/tk652/tk90/technologies_tech_note09186a0080325e8e.shtml
Regards
Leonardo Santana
09-25-2012 03:16 PM
Simply built either num-exp or ephone-dn with call forward all set to the desired designation.
Chris
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: