h.323 Gateway with Calling-name and Calling-number

[jheckart]

I migrated a voice gateway from MGCP to H.323 for purposes of faxing. I am using 12.4-11(XW6), with the support for calling name on the H.323 gateway. So, when a call comes in, the phone is showing only the calling name, and not the number as the MGCP gateway was able to do.

Is there a fix that I can show both name and number?

Thanks,

Jeff

[vmoopeung]

Try enabling caller-ID on the voice port.

Its is disabled by default.

http://www.cisco.com/en/US/tech/tk652/tk653/technologies_configuration_example09186a00800a9a49.shtml