cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
584
Views
0
Helpful
7
Replies

H323 New configuration incoming and outgoing not working

hi

 

We have configured h323 gatway but unable to make incoming and outgoing calls.

 

We have 
DID Range:

3617160300 - 3617160332   ( 361 is std code)

 

Internal extension:361300 , 361301, 361302, ....  ( 361 we assigned side code)

 

We have created dial-peers. but outgoing and incoming not workking 

 

outgoing calls getting cause code 21

debug voip ccaip inout

 

dial-peer voice 3 pots
discription outgoing calls.
destination-pattern 0T
incoming called-number .
direct-inward-dial
port 0/1/0:15
!
dial-peer voice 1 voip
destination-pattern 3613..
session target ipv4:XX.xx.xx.xx
incoming called-number .
voice-class codec 1 
dtmf-relay h245-alphanumeric

 

!dial-peer voice 2 voip
prefrence 1
destination-pattern 3613..
session target ipv4:xx.xx.xx.xx 
incoming called-number .
voice-class codec 1 
dtmf-relay h245-alphanumeric

dial-peer voice 4 pots
discription incoming calls
incoming called-number .
direct-inward-dial

 

Please help me is there any dial-peer issue. 

 

we need to config srst- how to create Translation rule.

 

PFA attached h323 config

7 Replies 7

jonathan.salter
Level 3
Level 3
I've made a few changes to the dial peers.....
What phones are you trying to register SRST? SCCP or SIP?
What translation rule do you need?



dial-peer voice 3 pots
discription outgoing calls.
destination-pattern 0T
direct-inward-dial
port 0/1/0:15


dial-peer voice 1 voip
destination-pattern 3613..
session target ipv4:XX.xx.xx.xx
incoming called-number .
voice-class codec 1
dtmf-relay h245-alphanumeric


!dial-peer voice 2 voip
prefrence 1
destination-pattern 3613..
session target ipv4:xx.xx.xx.xx
voice-class codec 1
dtmf-relay h245-alphanumeric


dial-peer voice 4 pots
discription incoming calls
incoming called-number .
direct-inward-dial
port 0/1/0:15
Please remember to rate useful posts, click on the stars below.

Sip phones CUCM registration
Translation rule need when cm
Connectivity lost and phones registered on srst router.

Chris Deren
Hall of Fame
Hall of Fame

Is there a reason you are doing H323 and not SIP?

No any reason as per client required is h323 .
Please check diapers and please help is there any issue in that

Post "debug voice ccapi inout" and "debug isdn q931" along with the number you called.

Debug ccapi input error
Getting disconnectcause code 21

Seems like trusted list in voice register global making the issue.

 

Can you remove the this command in voice register global or add those trusted ip and try an outgoing call.