I am working on a client site and trying to get CUBE to hairpin an inbound call from a SIP provider back out to an answering service in the event the CUCM is down. ISP SIP trunk <--> FW(NAT) <--> CUBE <--> CUCM. The routing works (call signaling) but there is no audio in the connected call. I am using a secondary dial-peer to trigger the re-routing. Any suggestions as to why no audio? Have tried several things.
what is probably going on is that the SIP packet received by the ISP contains the "Answering Service" IP Addr (CUBE's local IP Addr) not the CUBE's "NAT" IP Addr, in other words, the packet is going to the wrong path.
If this is the case you need to configure a voice class sip-profile to modify the SDP Header - from the "Answering Service" IP Addr to the CUBE's "NAT" IP Addr.
I'm trying to connect a Microsoft Wireless Display Adapter https://www.microsoft.com/accessories/en-us/products/adapters/wireless-display-adapter-2/p3q-00001 for Screen sharing. When the Adapter is connected to the Webex screen, it is recognised...
We are upgrading our UCM cluster from 10.5 to 12.5 what is the preferred method of license manager (Cisco Smart Software Manager) considering the security risksDirect could accessDirect cloud access through and HTTPs proxy -Mediated access through a...
1. IntroductionThe purpose of this document is to consolidate the list of deprecated Cisco IP Phone Models in different versions of Cisco Unified Communications Manager.2. RequirementsBasic knowledge of a Cisco Unified Communications ManagerBasic knowledg...
Message to visitors: this document is work in progress, will update in the coming weeks several times!
MPP 6800 series - DECT Deployment Guide
DECT stands for Digital Enhanced Cordless Telecommunications and is a standard for wireless voice services in bu...
This document describes how to collect CUCM devices reports from using the Command Line Interface (CLI) of the server's operating system (OS).
Contributed by Christian Nuche (cnuche), Cisco DSM Designated Services Manager - Hig...