cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
102
Views
0
Helpful
1
Replies

Having more than one E1 Links on the same router

tonyk0001
Beginner
Beginner

Hi Team,

Is it possible to have more that on E1 links from different Service providers on the same Voice GATEWAY.

If yes what is required?

Regards

1 Accepted Solution

Accepted Solutions

HARIS_HUSSAIN
Rising star
Rising star

Yes it is possible to have more than one E1 Links on Voice Gateway from Multiple Service Provider.

What you need is PVDM and VWIC Cards with Sufficient ports.

PVDM3 Data Sheet 

http://www.cisco.com/c/en/us/products/collateral/interfaces-modules/voice-modules-interface-cards/data_sheet_c78-553971.html

and VWIC3 Sheet

http://www.cisco.com/c/en/us/products/collateral/routers/2800-series-integrated-services-routers-isr/data_sheet_c36-609138.html

Please rate if helpful

Thanks 
Haris

View solution in original post

1 Reply 1

HARIS_HUSSAIN
Rising star
Rising star

Yes it is possible to have more than one E1 Links on Voice Gateway from Multiple Service Provider.

What you need is PVDM and VWIC Cards with Sufficient ports.

PVDM3 Data Sheet 

http://www.cisco.com/c/en/us/products/collateral/interfaces-modules/voice-modules-interface-cards/data_sheet_c78-553971.html

and VWIC3 Sheet

http://www.cisco.com/c/en/us/products/collateral/routers/2800-series-integrated-services-routers-isr/data_sheet_c36-609138.html

Please rate if helpful

Thanks 
Haris

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers