08-21-2012 06:53 PM - edited 03-16-2019 12:48 PM
Trying to put together a CCNA Voice Lab from spare parts..
So far I Have a 2651XM with NM-HDV2-2T1/E1 & VIC-2FXO= installed in the slot on the NM-HDV2.
VIC-2FXO has amber lights. Any ideas??
------------------------------------------
Router#sho ver
Cisco IOS Software, C2600 Software (C2600-IPVOICEK9-M), Version 12.4(25d), RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Wed 18-Aug-10 04:49 by prod_rel_team
ROM: System Bootstrap, Version 12.2(8r) [cmong 8r], RELEASE SOFTWARE (fc1)
Router uptime is 13 minutes
System returned to ROM by power-on
System image file is "flash:c2600-ipvoicek9-mz.124-25d.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
Cisco 2651XM (MPC860P) processor (revision 4.1) with 253952K/8192K bytes of memory.
Processor board ID FTX0942A2TS
M860 processor: part number 5, mask 2
2 FastEthernet interfaces
2 Channelized (E1 or T1)/PRI ports
32K bytes of NVRAM.
32768K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
Router#sho diag
Slot 0:
C2651XM 2FE Mainboard Port adapter, 2 ports
Port adapter is analyzed
Port adapter insertion time 00:09:07 ago
EEPROM contents at hardware discovery:
Hardware Revision : 4.1
PCB Serial Number : FOC09321EJ6
Product (
Chassis Serial Number : FTX0942A2TS
Part Number : 73-7756-06
RMA History : 00
RMA Number : 0-0-0-0
Board Revision : B0
Deviation Number : 0-0
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 03 6F 41 04 01 C1 0B 46 4F 43 30 39 33
0x10: 32 31 45 4A 36 CB 12 FF FF FF FF FF FF FF FF FF
0x20: FF FF FF FF FF FF FF FF FF C2 0B 46 54 58 30 39
0x30: 34 32 41 32 54 53 82 49 1E 4C 06 04 00 81 00 00
0x40: 00 00 42 42 30 80 00 00 00 00 FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
Slot 1:
High Density Voice NM-HDV2-2T1/E1 Port adapter
Port adapter is analyzed
Port adapter insertion time 00:08:54 ago
EEPROM contents at hardware discovery:
Hardware Revision : 1.1
Top Assy. Part Number : 800-22168-03
Board Revision : C0
Deviation Number : 0
Fab Version : 04
PCB Serial Number : FOC12121GCF
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Fab Part Number : 28-6126-04
Manufacturing Test Data : 00 00 00 00 00 00 00 00
Field Diagnostics Data : 00 00 00 00 00 00 00 00
Product (FRU) Number : NM-HDV2-2T1/E1
Version Identifier : V03
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 03 DB 41 01 01 C0 46 03 20 00 56 98 03
0x10: 42 43 30 88 00 00 00 00 02 04 C1 8B 46 4F 43 31
0x20: 32 31 32 31 47 43 46 03 00 81 00 00 00 00 04 00
0x30: 85 1C 17 EE 04 C4 08 00 00 00 00 00 00 00 00 C5
0x40: 08 00 00 00 00 00 00 00 00 CB 8E 4E 4D 2D 48 44
0x50: 56 32 2D 32 54 31 2F 45 31 89 56 30 33 20 D9 02
0x60: 40 C1 FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
FPGA revision:0x16C
WIC Slot 0:
FXO Voice daughter card (2 port)
Hardware revision 1.0 Board revision A0
Serial number 7048223 Part number 800-02495-01
FRU Part Number VIC-2FXO=
Test history 0x0 RMA number 00-00-00
Connector type Wan Module
EEPROM format version 1
EEPROM contents (hex):
0x20: 01 0D 01 00 00 6B 8C 1F 50 09 BF 01 00 00 00 00
0x30: 50 00 00 00 98 01 09 01 FF FF FF FF FF FF FF FF
WIC Slot 1:
HDV2 on board t1/e1 controller (2 port)
PVDM Slot 0:
32-channel (G.711) Voice/Fax PVDMII DSP SIMM PVDM daughter card
Hardware Revision : 4.0
Part Number : 73-8539-05
Board Revision : B0
Deviation Number : 0
Fab Version : 04
PCB Serial Number : FOC12121JHH
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Processor type : 00
Product (FRU) Number : PVDM2-32
Version Identifier : V01
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 03 EE 41 04 00 82 49 21 5B 05 42 42 30
0x10: 88 00 00 00 00 02 04 C1 8B 46 4F 43 31 32 31 32
0x20: 31 4A 48 48 03 00 81 00 00 00 00 04 00 09 00 CB
0x30: 88 50 56 44 4D 32 2D 33 32 89 56 30 31 20 D9 02
0x40: 40 C1 FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
Router#sho inventory
NAME: "2651XM chassis", DESCR: "2651XM chassis"
, VID: 4.1, SN: FTX0942A2TS
NAME: "High Density Voice2 Network module with on board two port interface ", DESCR: "High Density Voice2 Network module with on board two port interface "
PID: NM-HDV2-2T1/E1 , VID: V03 , SN: FOC12121GCF
NAME: "PVDMII DSP SIMM with Two DSPs", DESCR: "PVDMII DSP SIMM with Two DSPs"
PID: PVDM2-32 , VID: V01 , SN: FOC12121JHH
Solved! Go to Solution.
08-21-2012 07:06 PM
I am fairly certain that the NM-HDV2-2T1/E1 does not support insertion of the VIC-2FXO in the VWIC slot. A bit dated, but you can check this URL:
http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a008039c333.shtml
HTH.
Regards,
Bill (@ucguerrilla)
Please remember to rate helpful responses and identify
08-21-2012 07:06 PM
I am fairly certain that the NM-HDV2-2T1/E1 does not support insertion of the VIC-2FXO in the VWIC slot. A bit dated, but you can check this URL:
http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a008039c333.shtml
HTH.
Regards,
Bill (@ucguerrilla)
Please remember to rate helpful responses and identify
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: