help in registering Iphone cisco mobile 8.1 with CME 8.6

[edwincharles]

voice register global
mode cme
source-address 192.168.0.254 port 5060
max-dn 10
max-pool 10
authenticate register
hold-alert
tftp-path flash:
create profile sync 0000844404103214
!
voice register dn  9
number 1198
name ahmed
!
voice register pool  9
registration-timer max 720 min 660
id mac 581F.AA0E.8D65
session-transport tcp
type CiscoMobile-iOS
number 9 dn 9
username 1198 password 1198

recieving the follwing after verifying

when confgiuring in cisco moblie 8.1 it gives "no lines detected for device"

[paolo bevilacqua]

voice register global

create profile

and SE581FAA0E8D65 in app config.

[edwincharles]

created profile and

SEP581FAA0E8D65.cnf.xml is created in flash

i put the device id as SEP581FAA0E8D65 in IPHONE

still it gives  "no lines detected for device"

[paolo bevilacqua]

Coming in via VPN? Have you set ip tftp source-address ?

Or check debug tft event for misspellings.

[edwincharles]

we are trying to connect Iphone locally through wifi

[edwincharles]

the Iphone is working now

the prob was in the config

"number 9 dn 9 -> number 1 dn 9"

[billobob123]

hi,

this would be something i would be interested in doing in the futur with the iphone etc,

would you mind so much dumping your config file and or a little guide... to make this work. i think it would raise the interest of a few peoples

tx

[edwincharles]

voice register global
mode cme
source-address 192.168.0.254 port 5060
max-dn 10
max-pool 10
authenticate register
hold-alert
tftp-path flash:
create profile sync 0000844404103214
!
voice register dn 9
number 1198
name ahmed
!
voice register pool 9
registration-timer max 720 min 660
id mac 581F.AA0E.8D65
session-transport tcp
type CiscoMobile-iOS
number 1 dn 9
username 1198 password 1198

[jbaraona]

Hello, I have one question. where you able to integrate the Cisco Mobile 8.1 with the desk phone?

thanks,

Jose

[edwincharles]

no , was not able to.

edwin