help in registering Iphone cisco mobile 8.1 with CME 8.6
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
07-14-2011 03:08 AM - edited 03-16-2019 05:56 AM
voice register global
mode cme
source-address 192.168.0.254 port 5060
max-dn 10
max-pool 10
authenticate register
hold-alert
tftp-path flash:
create profile sync 0000844404103214
!
voice register dn 9
number 1198
name ahmed
!
voice register pool 9
registration-timer max 720 min 660
id mac 581F.AA0E.8D65
session-transport tcp
type CiscoMobile-iOS
number 9 dn 9
username 1198 password 1198
recieving the follwing after verifying
when confgiuring in cisco moblie 8.1 it gives "no lines detected for device"
- Labels:
-
Unified Communications

- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
07-14-2011 03:11 AM
voice register global
create profile
and SE581FAA0E8D65 in app config.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
07-14-2011 03:18 AM
created profile and
SEP581FAA0E8D65.cnf.xml is created in flash
i put the device id as SEP581FAA0E8D65 in IPHONE
still it gives "no lines detected for device"

- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
07-14-2011 03:31 PM
Coming in via VPN? Have you set ip tftp source-address ?
Or check debug tft event for misspellings.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
07-15-2011 09:56 PM
we are trying to connect Iphone locally through wifi
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
07-15-2011 11:02 PM
the Iphone is working now
the prob was in the config
"number 9 dn 9 -> number 1 dn 9"
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
07-15-2011 11:43 PM
hi,
this would be something i would be interested in doing in the futur with the iphone etc,
would you mind so much dumping your config file and or a little guide... to make this work. i think it would raise the interest of a few peoples
tx
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
07-24-2011 12:01 AM
voice register global
mode cme
source-address 192.168.0.254 port 5060
max-dn 10
max-pool 10
authenticate register
hold-alert
tftp-path flash:
create profile sync 0000844404103214
!
voice register dn 9
number 1198
name ahmed
!
voice register pool 9
registration-timer max 720 min 660
id mac 581F.AA0E.8D65
session-transport tcp
type CiscoMobile-iOS
number 1 dn 9
username 1198 password 1198
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
03-07-2012 04:29 PM
Hello, I have one question. where you able to integrate the Cisco Mobile 8.1 with the desk phone?
thanks,
Jose
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
03-07-2012 11:43 PM
no , was not able to.
edwin
