I did as you sent ;
but no Output/Result shown. Here is the outcome;
CME-c2921#debug voice application scripts
% Invalid input detected at '^' marker.
CME-c2921#debug voice application script
voip application script debugging is on
If no output, the call doesn't go to B/ACD, have a configuration mistake.
You need incoming called-number, not destination-pattern.
With that, you cause tromboning to PRI immediately.
When i tried with the "Incoming called -number " , No call was enable or any ringing coming.
Any idea what could be please ?
Do you have clue why i received this message;
CME-c2921#audio-prompt load flash:app-b-acd-aa-188.8.131.52.tcl
Reload of flash:app-b-acd-aa-184.108.40.206.tcl status failed
audio-prompt flash:app-b-acd-aa-220.127.116.11.tcl not loaded - open (or format) failure
I realized some mistake in my configuration "service queue flash:app-b-acd-aa-18.104.22.168.tcl" are the same for aa & queue , which is wrong.
I will correct this tomorrow and let you know
It is getting better ,but need to do some more digging
Here is the result ;
CME-c2921#show call application sessions
Session ID 13E
Session name: service
CME-c2921#13 01:07:36.492: //-1//TCL :EE2C04D2AC000:/tcl_PutsObjCmd: TCL B-ACD: >>> B-ACD Service Running <<<
CME-c2921#Apr 13 01:08:36.608: //-1//TCL :EE2C04D2AC000:/tcl_PutsObjCmd: TCL B-ACD: >>> B-ACD Service Running <<<
CME-c2921#Apr 13 01:08:45.048: //-1/xxxxxxxxxxxx/CCAPI/ccAppShutdownMode: ccAppShutdownMode: remove it from the queue
Here is the Solution
dial-peer voice 1 pots
translation-profile incoming INCOMING
incoming called-number .%==>>This will make incoming call become wildcard that will allowed Pilot number Dial-peer