11-22-2012 02:18 PM - edited 03-16-2019 02:20 PM
Hi guys,
I'm keep having problems with callmanager express, i'm struggling with the skinny firmware.
I configured my 2801 router as a tftp server so that my phones can pick the skinny firmware from the router.
I've downloaded the files from the cisco site (skinny software)
The phones probably not getting the files i think?
My phones on my CME are still registrering.
I've checked several things:
Sh ephone reg=> nothing
Sh ip dhcp binding
10.10.202.51 0100.1818.7c18.44 Nov 23 2012 10:14 PM Automatic
10.10.202.53 0100.1795.b0d7.ce Nov 23 2012 10:13 PM Automatic
This is good
sh telephony tftp binding:
tftp-server system:/its/spain/7960-tones.xml alias Spain/7960-tones.xml
tftp-server system:/its/united_states/7960-font.xml alias English_United_States/7960-font.xml
tftp-server system:/its/united_states/7960-font.xml alias English_United_States/7920-font.xml
tftp-server system:/its/united_states/7960-dictionary.xml alias English_United_States/7960-dictionary.xml
tftp-server system:/its/united_states/7960-kate.xml alias English_United_States/7960-kate.xml
tftp-server system:/its/united_states/7960-kate.xml alias English_United_States/7920-kate.xml
tftp-server system:/its/united_states/SCCP-dictionary.xml alias English_United_States/SCCP-dictionary.xml
tftp-server system:/its/SEPDEFAULT.cnf alias SEPDefault.cnf
tftp-server system:/its/vrf1/XMLDefault.cnf.xml alias XMLDefault.cnf.xml
tftp-server system:/its/vrf1/ATADefault.cnf.xml alias ATADefault.cnf.xml
check my router config i really don't no why the phones keeps saying registrering??
Is there something i am missing??
current configuration : 3184 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname BR2-RTR
!
boot-start-marker
boot-end-marker
!
logging message-counter syslog
!
no aaa new-model
memory-size iomem 20
no network-clock-participate wic 0
dot11 syslog
ip source-route
!
!
ip dhcp excluded-address 10.10.202.1 10.10.202.49
ip dhcp excluded-address 10.10.202.70 10.10.202.254
!
ip dhcp pool CME
network 10.10.202.0 255.255.255.0
option 150 ip 10.10.110.3
default-router 10.10.202.1
!
!
ip cef
no ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
voice-card 0
!
!
!
!
!
archive
log config
hidekeys
!
!
!
!
!
controller E1 0/0/0
!
!
!
!
!
interface Loopback0
ip address 10.10.110.3 255.255.255.255
!
interface FastEthernet0/0
ip address 10.10.210.16 255.255.255.0
duplex auto
speed auto
!
interface Service-Engine0/0
no ip address
shutdown
!
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
interface FastEthernet0/1/0
switchport trunk native vlan 200
switchport mode trunk
switchport voice vlan 400
!
interface FastEthernet0/1/1
switchport trunk native vlan 200
switchport mode trunk
switchport voice vlan 400
!
interface FastEthernet0/1/2
switchport trunk native vlan 200
switchport mode trunk
switchport voice vlan 400
!
interface FastEthernet0/1/3
switchport trunk native vlan 200
switchport mode trunk
switchport voice vlan 400
!
interface Serial0/2/0
no ip address
shutdown
no fair-queue
!
interface Serial0/2/1
ip address 10.10.112.2 255.255.255.0
encapsulation ppp
ip ospf mtu-ignore
!
interface Vlan1
no ip address
!
interface Vlan200
ip address 10.10.102.1 255.255.255.0
!
interface Vlan400
ip address 10.10.202.1 255.255.255.0
!
ip forward-protocol nd
no ip http server
no ip http secure-server
!
!
!
disable-eadi
!
!
!
!
!
!
tftp-server flash:SCCP41.9-3-1SR1-1S.loads
tftp-server flash:apps41.9-3-1ES8.sbn
tftp-server cmterm-7941_7961-sccp.9-3-1SR1-1.cop.sgn
tftp-server cnu41.9-3-1ES8.sbn
tftp-server flash:term61.default.loads
tftp-server flash:term41.default.loads
tftp-server flash:jar41sccp.9-3-1ES8.sbn
tftp-server flash:dsp41.9-3-1ES8.sbn
tftp-server flash:cvm41sccp.9-3-1ES8.sbn
!
control-plane
!
!
!
ccm-manager fax protocol cisco
!
!
!
!
!
!
!
gatekeeper
shutdown
!
!
telephony-service
max-ephones 2
max-dn 2
ip source-address 10.10.110.3 port 2000
auto assign 1 to 2
network-locale ES
network-locale 1 ES
network-locale 2 ES
network-locale 3 ES
network-locale 4 ES
load 7960-7940 P00
max-conferences 4 gain -6
transfer-system full-consult
server-security-mode non-secure
create cnf-files version-stamp Jan 01 2002 00:00:00
!
!
ephone-dn 1 dual-line
number 3001
!
!
ephone-dn 2 dual-line
number 3002
!
!
line con 0
exec-timeout 0 0
password cisco
line aux 0
line 66
no activation-character
no exec
transport preferred none
transport input all
transport output lat pad telnet rlogin lapb-ta mop udptn v120 ssh
line vty 0 4
privilege level 15
password cisco
login
transport input all
line vty 5 15
password cisco
login
transport input all
!
scheduler allocate 20000 1000
end
Solved! Go to Solution.
11-22-2012 02:44 PM
Hi Monasir,
I believe you would need to add ephone configuration here. Looking at the high level that's only part I see missing here.
!
ephone 11
mac-address xxxx.xxxx.xxxx
ephone-template 1
username "John"
type 7942
button 1:11
!
also configure ephone templates and ephone-dn templates as follows...
ephone-template 1
transfer max-length 11
softkeys hold Resume Newcall
softkeys idle Redial Newcall Cfwdall Pickup Dnd
softkeys seized Redial Endcall Cfwdall Pickup
softkeys alerting Callback Endcall
softkeys connected Hold Trnsfer Confrn TrnsfVM Endcall
softkeys ringing Dnd Answer
!
HTH.
Sky,
Pls rate helpful posts.
11-22-2012 02:44 PM
Hi Monasir,
I believe you would need to add ephone configuration here. Looking at the high level that's only part I see missing here.
!
ephone 11
mac-address xxxx.xxxx.xxxx
ephone-template 1
username "John"
type 7942
button 1:11
!
also configure ephone templates and ephone-dn templates as follows...
ephone-template 1
transfer max-length 11
softkeys hold Resume Newcall
softkeys idle Redial Newcall Cfwdall Pickup Dnd
softkeys seized Redial Endcall Cfwdall Pickup
softkeys alerting Callback Endcall
softkeys connected Hold Trnsfer Confrn TrnsfVM Endcall
softkeys ringing Dnd Answer
!
HTH.
Sky,
Pls rate helpful posts.
11-22-2012 02:47 PM
Ensure button assignment 1:11 means first line of your physical phone is binded with ephone-dn 11.
Here in your case it would
1:1
1:2
11-22-2012 04:55 PM
Hi,
Please use the below link for reference.
http://www.cisco.com/image/gif/paws/99946/cme-sip-guide.pdf
Hope this helps.
Anand
Please rate helpful posts !!
11-23-2012 11:07 AM
Hi there everyone
It worked but i had to something else the phones where still keep registering.
So what i did is i've put both phones on the CME in factory reset and they where both rebooting in the good firmware/load files.
I've assigned them both a mac adress and everything went fine.
Also when i say sh telephony service tftp binding you can see both phones have the right XML files.
Any way i would like to thank you guys for your support and help!
Appreciate it...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide