cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2864
Views
0
Helpful
2
Replies
Beginner

Hot dial for cisco 9951 sip phone

Hi All,

Has anyone been able to make this work?

I have it configured and working for SCCP by creating a blank translation pattern but when the same configuation is set for a 9951 it does not automatically dial to the translated number. This is in Call Manager 7.1 not CME.

Any ideas?

Help..... :$

Thanks

Rick

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Beginner

Re: Hot dial for cisco 9951 sip phone

2 REPLIES 2
Highlighted
Beginner

Re: Hot dial for cisco 9951 sip phone

Highlighted
Beginner

Re: Hot dial for cisco 9951 sip phone

Long story short....

I had to create a blank SIP dial rule simular to the blank translation pattern. Once selected on the phone it all worked fine.

Call Routing > Dial Rules > SIP Dial Rules . Add

Then Find the phone and under Protocol Specific Information > SIP Dial Rules and then select the SIP dial rule that you created

Rick

CreatePlease to create content