03-07-2012 10:53 AM - edited 03-16-2019 09:59 AM
Hi,
What is the configuration for hotline (PLAR) in ATA 187?
The CUCM version is 8.6.1.20000-1
The ATA-187 firmware version is ATA187.9-2-3-1, which support PLAR according to the Release Notes:
http://www.cisco.com/en/US/docs/voice_ip_comm/cata/187/9_2_3/english/release/notes/atarn923.html
The ATA 187 phone configuration window in the CUCM includes the following Note:
***** Note: A custom Softkey template without supplementary service Softkeys must be used for a Hot line Device.
Thanks,
Shlomi
03-07-2012 07:35 PM
Hi
See if this helps you
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_0_1/ccmcfg/b03dn.html#wpxref85834
step 5 and 6 are for SIP phone.
Regards
Ronak Patel
10-03-2013 11:44 AM
Hello friend
did work this?
TIA
Cristian
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide