Dear All;
I have H323 GW (2911) with FXO port (VIC2-4FXO) ; the FXO confeguration and dial-peer like this :
voice-port 0/2/3
connection plar opx 4782268
caller_id enable
!
dial-peer voice 4782268 voip
translation-profile incoming phone7
answer-address 4782268
destination-pattern 4782268
session target ipv4:192.168.1.200
!
voice translation-rule 7
rule 1 /^9/ /79/
!
voice translation-profile phone7
translate called 7
!
dial-peer voice 79 pots
destination-pattern 79T
port 0/2/3
!
my scenario is when the call comes on fxo it be directed to extenssion number 4782268 successfully, but without any information of caller id,
it displayed "Unknown Number" , the Caller ID Presentation service is activated from the local PSTN and I tested the line using normal analog phone ;
I can get Caller ID ( DN + name) only from internal calls, but calls incomming form PSTN it gives "Unknown" .
PLease if any one has idia to solve this problem ;
Note : we use CUCM 8.5
Thanks inadvance ;
Rashed