How to access CUCM ?

Slim Shady · ‎06-26-2018

I'm using cisco router 2901. How to access Cisco call manager in it ? Also how to configure it ?

M02@rt37 · ‎06-26-2018

CUCM is the server version.

CME is the call manager configured on a router.

You access to your router as usual in order ton configure in CLI or GUI your router as Call Manager. Be carefull to have the licence cme-srst activated on that router.

Here the holy bible in order to configure router as CME:

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/manual/cmeadm.html

And here the cisco doc to activate GUI:

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/manual/cmeadm/cmegui.html

Best regards
.ı|ı.ı|ı. If This Helps, Please Rate .ı|ı.ı|ı.

Jaime Valencia · ‎06-26-2018

As a side note, most of the newer devices are SIP, and the CME GUI does not support them, so you'll need to use CLI for them.

HTH

java

if this helps, please rate