Solved: How to check CUBE version in router?

adil.nasser3 · ‎12-03-2013

Hello,

What is the command to show the version of CUBE software running an IOS voice router?

Adil

Chris Deren · ‎12-03-2013

Leo, your link seems to take us into infinite loop :-(

Adil, issue "sh version" which will give you the IOS version on the router, which is what most people go by, if you need to cross-reference that to CUBE version then I belive it is the same as CME version, which this matrix will provide:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/33matrix.htm

HTH,

Chris

View solution in original post

Leo Laohoo · ‎12-03-2013

Duplicate posts.

Chris Deren · ‎12-03-2013

Leo, your link seems to take us into infinite loop :-(

Adil, issue "sh version" which will give you the IOS version on the router, which is what most people go by, if you need to cross-reference that to CUBE version then I belive it is the same as CME version, which this matrix will provide:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/33matrix.htm

HTH,

Chris

Leo Laohoo · ‎12-03-2013

Leo, your link seems to take us into infinite loop :-(

Sorry. Wanted to let everyone know the different links. If I don't put the link to the other one ...

adil.nasser3 · ‎12-10-2013

Thank you Chris.