cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
306
Views
0
Helpful
0
Replies

How to configure CME 10.0 SIP phones to use Paging ?

Nightspider_2
Level 1
Level 1

Hi All,

Trying to find examples of configuring SIP phones (3905,7821,8945,8961) with site wide paging but can only see SCCP configuration

The phones are configured on CME 10 as shown below:

##########################

voice register dn  1
 number 243

 

voice register pool  1
 id mac 2C3E.CF77.384A
 type 3905
 number 1 dn 1
 dtmf-relay rtp-nte sip-notify
 username cisco password cisco
 codec g711alaw
 no vad

###################

Do I create an ephone-dn as shown below:

--------------------------

ephone-dn 50

number 500 no-reg primary

description PAGING

name PAGING

paging ip 239.0.1.20 port 2000

-------------------------------------

and then apply the paging-dn 50 command to the voice register pool  1 device?

Many thanks in advance

0 Replies 0