I want configure 4 FXO Ports on a CME router.The scenario i am using is that my customer has 1 PRI and if that fails then all the outgoing calls should go through FXO ports.Also i don't want any incoming calls to come on those FXO ports.Please let me know what all parameters i need to configure for the same.
The easiest way is you can create several separate outbound POTS dial-peers, one pointing to the PRI (with the default preference 0), the other one with preference 1, 2, 3 etc.. pointing to the FXO ports.
To block incoming call, you can do something like this:
voice translation-rule 100 rule 1 reject /^.*/ !
voice translation-profile BlockCalls translate called 100
IntroductionThe IssueServices Shown their status as UnknownWhat actions require to be taken?Logs required for troubleshootingWhat to expect in the logs:
The purpose of this document is to provide troubleshooting insight into a well-known iss...
New Cisco Champion Radio release on Zero Trust for WebexListen: https://smarturl.it/CCRS8E14 Follow us: https://twitter.com/CiscoChampion Cisco introduced End to End (E2E) Encryption in 2008 as a Webex Meeting option where only the me...
Community Live- Tour of the Real-Time Monitoring Tool
(Live event - Tuesday, 20 April, 2021 at 10:00 am Pacific/ 1:00 pm Eastern / 7:00 pm Paris)
This event will have place on Tuesday 20th, April 2021 at 10:00 hrs PDT
Learn: How to configure Cloud Connected PSTN with Webex Calling
CCP Provider Name
Product Home Page Link
Webex Calling Region
Countries Supported by Provider
Free Trial Link
Contact Provider Link
FR & LU
Meet the Authors Video - Leveraging SBCs to Empower a Changing World of Collaboration
(Live event – Tuesday, 16th, 2020 at 10:00 a.m. Pacific / 1:00 p.m. Eastern / 7:00 p.m. Paris)
This event had place on Tuesday 16th, February 2020 at 10am PST ...