cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
98
Views
5
Helpful
1
Replies
Highlighted
Explorer

How to disable the Summer Time in CUCM11.0

Hi,

I have a CMBE6K-S preconfigured.

The problem is that the CUCM was configured with a timezone with Summer Time (Dst) enabled.

I want to remove the DST, so my timezone will be OK. I've already changed the NTP reference, or the Date/Time Group but no success.

When I check on the CLI I still see the dst and the original timezone where Cisco has preconfigured the CUCM.

We are in a region (emea) that not need the DST. (GMT+3 Nairobi).

how to do it?

Regards,

Antra

1 REPLY 1
Cisco Employee

Refer below link to update

Refer below link to update/change DST

https://supportforums.cisco.com/discussion/11286791/cucm-timezone

http://www.cisco.com/c/en/us/support/docs/unified-communications/unified-communications-manager-callmanager/118744-technote-cucm-00.html

You can view the list of available time zones with this command:

admin:show timezone list

   0 - Africa/Abidjan
   1 - Africa/Accra
   2 - Africa/Addis_Ababa
   3 - Africa/Algiers
   4 - Africa/Asmara
   5 - Africa/Bamako[...]
405 - Europe/Warsaw
[...]

And time zones on CUCM can be set with this command:

admin:set timezone 405

Using timezone: Europe/Warsaw

A system restart is required

In this command, 405 is the mapping of the 405 to the Europe/Warsaw time zone.

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards