cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2644
Views
25
Helpful
22
Replies

How to format a CF for AIM-CUE using windows machine?

kirkedwards
Level 1
Level 1

     As part of my CCNP-Voice lab I bought a 2801 setup a little home lab. Later I bought a AIM-CUE for it. Later still I got a 1GB CF card, but no matter what I do the CF card will not work in the AIM-CUE. I keep getting an error stating "Not a cisco support CF." I'm sure it is simply a matter of formating the card properly, but how?

     I have a windows PC with a slot that fits, so I can format it there, if I knew the exact sintax.

     Thanks.

     This is my first post. Thanks for any help.

22 Replies 22

Leo,

         I'm still having this problem. Have gone thru multiple CF cards, including a brand new 1GB Cisco card, all with the exact same results. Do you do anything to the cards before plugging them into the AIM-CUE?

         Thanks.

                           Kirk

kirkedwards
Level 1
Level 1

All,

     So I think I've worked my way thru the CF problem, and am now having problems during the software load just after selecting the language. I opened a different discussion on that issue, and got an answer back saying that each AIM-CUE is shipped with signature on the flash card, and if the signature on the flash card is missing it will not boot.

     That seems totally different that what I've been hearing about simply getting a new CF.

     Either way, below is the output from my failed install. Any ideas what the cause is now?

Remove: /mnt/dwnld/pkgdata/cue-vm-nl_NL-langpack.nm-aim.7.0.6.prt1

Remove: /mnt/dwnld/pkgdata/cue-vm-sv_SE-langpack.nm-aim.7.0.6.prt1

Remove: /mnt/dwnld/pkgdata/cue-vm-no_NO-langpack.nm-aim.7.0.6.prt1

Remove: /mnt/dwnld/pkgdata/cue-vm-fr_CA-langpack.nm-aim.7.0.6.prt1

Remove: /mnt/dwnld/pkgdata/cue-vm-pt_PT-langpack.nm-aim.7.0.6.prt1

Remove: /mnt/dwnld/pkgdata/cue-vm-tr_TR-langpack.nm-aim.7.0.6.prt1

Remove: /mnt/dwnld/pkgdata/cue-vm-hu_HU-langpack.nm-aim.7.0.6.prt1

Remove: /mnt/dwnld/pkgdata/cue-vm-en_GB-langpack.nm-aim.7.0.6.prt1

Remove: /mnt/dwnld/pkgdata/cue-vm-de_DE-langpack.nm-aim.7.0.6.prt1

Remove: /mnt/dwnld/pkgdata/cue-vm-da_DK-langpack.nm-aim.7.0.6.prt1

Remove: /mnt/dwnld/pkgdata/cue-vm-pt_BR-langpack.nm-aim.7.0.6.prt1

Remove: /mnt/dwnld/pkgdata/cue-vm-ko_KR-langpack.nm-aim.7.0.6.prt1

INIT: Sending processes the TERM signal

mount: /sys not mounted already, or bad option

mount: /dev/pts not mounted already, or bad option

mount: mount point /dev/shm does not exist

Remounting device 03:01 ... OK

Remounting device 01:00 ... OK

Done.

Restarting system.

Initializing memory.  Please wait. ... 256 MB SDRAM detected

BIOS Version: Cisco SE-AIM 01.02

BIOS Build date: 08/14/03

System Now Booting ...[BOOT-ASM]

Please enter '***' to change boot configuration:

Not a cisco supported CF. Please use cisco supported CF and reinstall the softw

are.

System Halted.

Log is incomplete and does not show the actual failure.

It could be simply the language file missing.

I really appreciate all the help. I've lost track of all the time I've spent trying to get this to work.

First I tried CUE 2.2, then 3.2.2, then 3.2.5, now 7.0.6. Below is the latest list of files I'm using to load. I think I have everything.

cue-installer.nm-aim.7.0.6

cue-vm-k9.nm-aim.7.0.6.pkg

cue-vm-langpack.nm-aim.7.0.6.pkg

cue-vm-license_12mbx_cme_7.0.6.pkg

cue-vm-en_US-langpack.nm-aim.7.0.6.prt1

cue-vm-full-k9.nm-aim.7.0.6.prt1

cue-vm-installer-k9.nm-aim.7.0.6.prt1

Below is as much of the install file as my system memory can hold.

Things do look funny right after I select the language, but I can't make out what it means.

Thanks.

Validating package signature ... done

Found Add-On Subsystem SID: e2e81cc6-39b5-47e1-9f83-b83c897fc50c Name: CUE Voice

mail Language Support Version: 7.0.6

Found Add-On Subsystem SID: c28339fa-f7ae-4732-85ab-fa6c68b5de0c Name: CUE Voice

mail Italian Version: 7.0.6

Found Add-On Subsystem SID: 49f09114-e0b0-4721-8b85-04be2064920c Name: CUE Voice

mail European Spanish Version: 7.0.6

Found Add-On Subsystem SID: 27e5e2ab-1622-4c02-8a0a-cfad0d932148 Name: CUE Voice

mail US English Version: 7.0.6

Found Add-On Subsystem SID: cf860289-67ac-4886-9295-a41e4c7a8487 Name: CUE Voice

mail European French Version: 7.0.6

Found Add-On Subsystem SID: f0a41398-3917-4d49-b5ab-c2b39a80c121 Name: CUE Voice

mail Latin American Spanish Version: 7.0.6

Found Add-On Subsystem SID: c4ca62e2-daff-40dc-b94e-bf20094bd700 Name: CUE Voice

mail Mexican Spanish Version: 7.0.6

Found Add-On Subsystem SID: 88a84158-c090-4203-bde8-0d62eda200c7 Name: CUE Voice

mail Arabic Version: 7.0.6

Found Add-On Subsystem SID: ab049397-cfad-4952-852a-8dfa69780cb8 Name: CUE Voice

mail Dutch Version: 7.0.6

Found Add-On Subsystem SID: d60c3add-0c6b-4a99-8e5c-31019fe7939e Name: CUE Voice

mail Swedish Version: 7.0.6

Found Add-On Subsystem SID: e1ed9919-31da-4c38-b029-9bbd8231d523 Name: CUE Voice

mail Norwegian Version: 7.0.6

Found Add-On Subsystem SID: 683674a5-e6ef-4c97-8e05-efbba1e6fe47 Name: CUE Voice

mail Canadian French Version: 7.0.6

Found Add-On Subsystem SID: c3d2409a-ae9a-47d3-baf0-3c1a3ff85d82 Name: CUE Voice

mail Portuguese Version: 7.0.6

Found Add-On Subsystem SID: b18bcd35-5a37-46af-b230-0d9c27713dec Name: CUE Voice

mail Turkish Version: 7.0.6

Found Add-On Subsystem SID: 3e72a8ae-45d2-4790-b0b5-9301600e886e Name: CUE Voice

mail Hungarian Version: 7.0.6

Found Add-On Subsystem SID: fa803d25-9c89-4171-a14c-ec12d6ed6b8c Name: CUE Voice

mail UK English Version: 7.0.6

Found Add-On Subsystem SID: 3f968fd0-6598-48e2-be1c-4af6c2e02e02 Name: CUE Voice

mail German Version: 7.0.6

Found Add-On Subsystem SID: 88f73a6c-884d-4838-b162-1b544dd6583f Name: CUE Voice

mail Danish Version: 7.0.6

Found Add-On Subsystem SID: a2ba4f96-3452-40c3-83ad-c442cb6bf42f Name: CUE Voice

mail Brazilian Portuguese Version: 7.0.6

Found Add-On Subsystem SID: ea206a88-e44f-488b-a660-114a3b179065 Name: CUE Voice

mail Korean Version: 7.0.6

Found Add-On Subsystem SID: 372fa3fd-1efb-4353-9005-45876646a351 Name: CUE Voice

mail Mandarin Chinese Version: 7.0.6

Found Add-On Subsystem SID: 6cdfed34-6d45-48fd-afe0-717e589c9aa9 Name: CUE Voice

mail Japanese Version: 7.0.6

Found Add-On Subsystem SID: 24cb0b00-ed1c-4463-bf6f-261b15dfb3e7 Name: CUE Voice

mail Russian Version: 7.0.6

WARNING:: Software installation will clear disk contents

Continue [n]? y

cleaning fs

prepfs.sh: aim reiser /mnt clean

hd_name: /dev/hda

hd_part: /dev/hda1

umount: /dev/hda1: not mounted

check_partition_count: 0

check_partition_flag: 1

The number of cylinders for this disk is set to 3897.

There is nothing wrong with that, but this is larger than 1024,

and could in certain setups cause problems with:

1) software that runs at boot time (e.g., old versions of LILO)

2) booting and partitioning software from other OSs

   (e.g., DOS FDISK, OS/2 FDISK)

Command (m for help): Partition number (1-4):

Command (m for help): Selected partition 1

Command (m for help): Command action

   e   extended

   p   primary partition (1-4)

Partition number (1-4): First cylinder (1-3897, default 1): Using default value

1

Last cylinder or +size or +sizeM or +sizeK (1-3897, default 3897):

Command (m for help): Command action

   e   extended

   p   primary partition (1-4)

Partition number (1-4): First cylinder (10-3897, default 10): Using default valu

e 10

Last cylinder or +size or +sizeM or +sizeK (10-3897, default 3897): Using defaul

t value 3897

Command (m for help): The partition table has been altered!

Calling ioctl() to re-read partition table.

Syncing disks.

mkreiserfs 3.6.19 (2003 www.namesys.com)

Starting payload download

File : cue-vm-full-k9.nm-aim.7.0.6.prt1 Bytes : 89775753

Validating payloads match registered checksums...

- cue-vm-full-k9.nm-aim.7.0.6.prt1 ............................................

..........................................verified

Extracting install scripts ...

starting_phase:

install_files.sh /mnt/dwnld/.script_work_order

add_file /mnt/dwnld/pkgdata/cue-vm-full-k9.nm-aim.7.0.6.prt1 15 /dwnld/scripts/e

2e81cc6-39b5-47e1-9f83-b83c897fc50c usr/bin/products/cue/lang_ui_script.py tgz

tar: usr/bin/products/cue/lang_ui_script.py: time stamp 2010-09-25 08:26:23 is 1

49329002 s in the future

Scripts extraction complete.

Remove scripts work order /mnt/dwnld/.script_work_order

Running Script Processor for ui_install

Maximum 2 language add-ons allowed for this platform.

Please select language(s) to install from the following list:

Language Installation Menu:

#  Selected   SKU     Language Name (version)

----------------------------------------------------------------------

1            ITA     CUE Voicemail Italian (7.0.6)

2            ESP     CUE Voicemail European Spanish (7.0.6)

3            ENU     CUE Voicemail US English (7.0.6)

4            FRA     CUE Voicemail European French (7.0.6)

5            ESO     CUE Voicemail Latin American Spanish (7.0.6)

6            ESM     CUE Voicemail Mexican Spanish (7.0.6)

7            ARA     CUE Voicemail Arabic (7.0.6)

8            NLD     CUE Voicemail Dutch (7.0.6)

9            SVE     CUE Voicemail Swedish (7.0.6)

10            NOR     CUE Voicemail Norwegian (7.0.6)

11            FRC     CUE Voicemail Canadian French (7.0.6)

12            PTG     CUE Voicemail Portuguese (7.0.6)

13            TUR     CUE Voicemail Turkish (7.0.6)

14            HUN     CUE Voicemail Hungarian (7.0.6)

15            ENG     CUE Voicemail UK English (7.0.6)

16            DEU     CUE Voicemail German (7.0.6)

17            DAN     CUE Voicemail Danish (7.0.6)

18            PTB     CUE Voicemail Brazilian Portuguese (7.0.6)

19            KOR     CUE Voicemail Korean (7.0.6)

20            CHS     CUE Voicemail Mandarin Chinese (7.0.6)

21            JPN     CUE Voicemail Japanese (7.0.6)

22            RUS     CUE Voicemail Russian (7.0.6)

----------------------------------------------------------------------

Available commands are:

# - enter the number for the language to select one

r # - remove the language for given #

i # - more information about the language for given #

x - Done with language selection

Enter Command:3

Language Installation Menu:

#  Selected   SKU     Language Name (version)

----------------------------------------------------------------------

1            ITA     CUE Voicemail Italian (7.0.6)

2            ESP     CUE Voicemail European Spanish (7.0.6)

3      *     ENU     CUE Voicemail US English (7.0.6)

4            FRA     CUE Voicemail European French (7.0.6)

5            ESO     CUE Voicemail Latin American Spanish (7.0.6)

6            ESM     CUE Voicemail Mexican Spanish (7.0.6)

7            ARA     CUE Voicemail Arabic (7.0.6)

8            NLD     CUE Voicemail Dutch (7.0.6)

9            SVE     CUE Voicemail Swedish (7.0.6)

10            NOR     CUE Voicemail Norwegian (7.0.6)

11            FRC     CUE Voicemail Canadian French (7.0.6)

12            PTG     CUE Voicemail Portuguese (7.0.6)

13            TUR     CUE Voicemail Turkish (7.0.6)

14            HUN     CUE Voicemail Hungarian (7.0.6)

15            ENG     CUE Voicemail UK English (7.0.6)

16            DEU     CUE Voicemail German (7.0.6)

17            DAN     CUE Voicemail Danish (7.0.6)

18            PTB     CUE Voicemail Brazilian Portuguese (7.0.6)

19            KOR     CUE Voicemail Korean (7.0.6)

20            CHS     CUE Voicemail Mandarin Chinese (7.0.6)

21            JPN     CUE Voicemail Japanese (7.0.6)

22            RUS     CUE Voicemail Russian (7.0.6)

----------------------------------------------------------------------

Available commands are:

# - enter the number for the language to select one

r # - remove the language for given #

i # - more information about the language for given #

x - Done with language selection

Enter Command:x

ui_install scripts executed successfully.

Starting payload download

File : cue-vm-en_US-langpack.nm-aim.7.0.6.prt1 Bytes : 28198577

Validating payloads match registered checksums...

- cue-vm-en_US-langpack.nm-aim.7.0.6.prt1 ...........................verified

No installed manifests found.

wo_path  /mnt/dwnld/.work_order

sc  /bin/installer_shutdown.sh /mnt/dwnld/.work_order

Shutting down processes ... Please wait

.

EXITED: dwnldr_startup.sh exit status 137

Process shutdown complete.

starting_phase:

install_files.sh /mnt/dwnld/.work_order

Sat Sep 25 09:27:52 UTC 2010

Remove: /mnt//

root directory

removing install_tmp

removing sw

add_file /mnt/dwnld/pkgdata/cue-vm-full-k9.nm-aim.7.0.6.prt1 6 /mnt tgz

add_file /mnt/dwnld/pkgdata/cue-vm-full-k9.nm-aim.7.0.6.prt1 9 /mnt tgz

add_file /mnt/dwnld/pkgdata/cue-vm-full-k9.nm-aim.7.0.6.prt1 11 /mnt tgz

add_file /mnt/dwnld/pkgdata/cue-vm-full-k9.nm-aim.7.0.6.prt1 13 /mnt tgz

add_file /mnt/dwnld/pkgdata/cue-vm-full-k9.nm-aim.7.0.6.prt1 15 /mnt tgz

add_file /mnt/dwnld/pkgdata/cue-vm-full-k9.nm-aim.7.0.6.prt1 17 /mnt tgz

add_file /mnt/dwnld/pkgdata/cue-vm-en_US-langpack.nm-aim.7.0.6.prt1 1 /mnt tgz

extract_mv_file: /mnt/dwnld/pkgdata/cue-vm-full-k9.nm-aim.7.0.6.prt1 4 /mnt lib

tgz

extract_mv_file: /mnt/dwnld/pkgdata/cue-vm-full-k9.nm-aim.7.0.6.prt1 4 /mnt bin

tgz

extract_mv_file: /mnt/dwnld/pkgdata/cue-vm-full-k9.nm-aim.7.0.6.prt1 4 /mnt etc

tgz

extract_mv_file: /mnt/dwnld/pkgdata/cue-vm-full-k9.nm-aim.7.0.6.prt1 4 /mnt sbin

tgz

install_file: 2VjKrF+SB6RwlA39dL02yGvgPRKULq3+SkvQtOasD+nFuJMGUS8kOW+ku6OZlHmU0+

Y57JNdvVMuCWp/AUqqrrewDqffuSDlXWsdgvFISygJ1ZkFSnmqeX3jQuodpYDQHFsFq0K350I7ftPLkw

/LVQy3SxkzCHQgYdiwS5DdUk0= __BZ_SIGNATURE__

bzsig ldbl -m aim -t bzsig 2VjKrF+SB6RwlA39dL02yGvgPRKULq3+SkvQtOasD+nFuJMGUS8kO

W+ku6OZlHmU0+Y57JNdvVMuCWp/AUqqrrewDqffuSDlXWsdgvFISygJ1ZkFSnmqeX3jQuodpYDQHFsFq

0K350I7ftPLkw/LVQy3SxkzCHQgYdiwS5DdUk0=

add_file /mnt/dwnld/pkgdata/cue-vm-full-k9.nm-aim.7.0.6.prt1 4 /mnt bzImage tgz

add_file /mnt/dwnld/pkgdata/cue-vm-k9.nm-aim.7.0.6.pkg 7 /mnt sw/installed/manif

est/thirdparty_infrastructure_manifest.sig none

add_file /mnt/dwnld/pkgdata/cue-vm-k9.nm-aim.7.0.6.pkg 1 /mnt sw/installed/manif

est/bootloader_prim_manifest.sig none

add_file /mnt/dwnld/pkgdata/cue-vm-k9.nm-aim.7.0.6.pkg 8 /mnt sw/installed/manif

est/infrastructure_manifest.sig none

add_file /mnt/dwnld/pkgdata/cue-vm-langpack.nm-aim.7.0.6.pkg 20 /mnt sw/installe

d/manifest/lang_support_manifest.sig none

add_file /mnt/dwnld/pkgdata/cue-vm-k9.nm-aim.7.0.6.pkg 10 /mnt sw/installed/mani

fest/global_manifest.sig none

add_file /mnt/dwnld/pkgdata/cue-vm-langpack.nm-aim.7.0.6.pkg 2 /mnt sw/installed

/manifest/en_US_lang_manifest.sig none

add_file /mnt/dwnld/pkgdata/cue-vm-k9.nm-aim.7.0.6.pkg 9 /mnt sw/installed/manif

est/telephony_infrastructure_manifest.sig none

add_file /mnt/dwnld/pkgdata/cue-vm-k9.nm-aim.7.0.6.pkg 3 /mnt sw/installed/manif

est/voicemail_manifest.sig none

add_file /mnt/dwnld/pkgdata/cue-vm-k9.nm-aim.7.0.6.pkg 4 /mnt sw/installed/manif

est/bootloader_sec_manifest.sig none

add_file /mnt/dwnld/pkgdata/cue-vm-k9.nm-aim.7.0.6.pkg 6 /mnt sw/installed/manif

est/installer_manifest.sig none

add_file /mnt/dwnld/pkgdata/cue-vm-k9.nm-aim.7.0.6.pkg 2 /mnt sw/installed/manif

est/oscore_manifest.sig none

add_file /mnt/dwnld/pkgdata/cue-vm-k9.nm-aim.7.0.6.pkg 5 /mnt sw/installed/manif

est/gpl_infrastructure_manifest.sig none

Remove: /mnt/dwnld/pkgdata/cue-vm-langpack.nm-aim.7.0.6.pkg

Remove: /mnt/dwnld/pkgdata/cue-vm-k9.nm-aim.7.0.6.pkg

Remove: /mnt/dwnld/pkgdata/cue-vm-full-k9.nm-aim.7.0.6.prt1

Remove: /mnt/dwnld/pkgdata/cue-vm-it_IT-langpack.nm-aim.7.0.6.prt1

Remove: /mnt/dwnld/pkgdata/cue-vm-es_ES-langpack.nm-aim.7.0.6.prt1

Remove: /mnt/dwnld/pkgdata/cue-vm-en_US-langpack.nm-aim.7.0.6.prt1

Remove: /mnt/dwnld/pkgdata/cue-vm-fr_FR-langpack.nm-aim.7.0.6.prt1

Remove: /mnt/dwnld/pkgdata/cue-vm-es_CO-langpack.nm-aim.7.0.6.prt1

Remove: /mnt/dwnld/pkgdata/cue-vm-es_MX-langpack.nm-aim.7.0.6.prt1

Remove: /mnt/dwnld/pkgdata/cue-vm-ar_SA-langpack.nm-aim.7.0.6.prt1

Remove: /mnt/dwnld/pkgdata/cue-vm-nl_NL-langpack.nm-aim.7.0.6.prt1

Remove: /mnt/dwnld/pkgdata/cue-vm-sv_SE-langpack.nm-aim.7.0.6.prt1

Remove: /mnt/dwnld/pkgdata/cue-vm-no_NO-langpack.nm-aim.7.0.6.prt1

Remove: /mnt/dwnld/pkgdata/cue-vm-fr_CA-langpack.nm-aim.7.0.6.prt1

Remove: /mnt/dwnld/pkgdata/cue-vm-pt_PT-langpack.nm-aim.7.0.6.prt1

Remove: /mnt/dwnld/pkgdata/cue-vm-tr_TR-langpack.nm-aim.7.0.6.prt1

Remove: /mnt/dwnld/pkgdata/cue-vm-hu_HU-langpack.nm-aim.7.0.6.prt1

Remove: /mnt/dwnld/pkgdata/cue-vm-en_GB-langpack.nm-aim.7.0.6.prt1

Remove: /mnt/dwnld/pkgdata/cue-vm-de_DE-langpack.nm-aim.7.0.6.prt1

Remove: /mnt/dwnld/pkgdata/cue-vm-da_DK-langpack.nm-aim.7.0.6.prt1

Remove: /mnt/dwnld/pkgdata/cue-vm-pt_BR-langpack.nm-aim.7.0.6.prt1

Remove: /mnt/dwnld/pkgdata/cue-vm-ko_KR-langpack.nm-aim.7.0.6.prt1

INIT: Sending processes the TERM signal

mount: /sys not mounted already, or bad option

mount: /dev/pts not mounted already, or bad option

mount: mount point /dev/shm does not exist

Remounting device 03:01 ... OK

Remounting device 01:00 ... OK

Done.

Restarting system.

Initializing memory.  Please wait. ... 256 MB SDRAM detected

BIOS Version: Cisco SE-AIM 01.02

BIOS Build date: 08/14/03

System Now Booting ...[BOOT-ASM]

Please enter '***' to change boot configuration:

Not a cisco supported CF. Please use cisco supported CF and reinstall the softw

are.

System Halted.

Initializing memory.  Please wait. ... 256 MB SDRAM detected

BIOS Version: Cisco SE-AIM 01.02

BIOS Build date: 08/14/03

System Now Booting ...[BOOT-ASM]

Please enter '***' to change boot configuration:

Not a cisco supported CF. Please use cisco supported CF and reinstall the softw

are.

System Halted.

It seems like you have meet an unfortunate 'signature' lock of which existence I wasn't even aware, I suppose there is no practical solution to that except if you can find a CF card that passes whatever check is in BOOT-ASM.

So here's my problem. I've gone thru four different CF cards, including one from Cisco.

Couldn't there be something else going on?

All,

     This problem is not answered. Still having the problem. Got a brand new 1GB Cisco CF card and still having the exact same problem. Any ideas (other than get a sixth CF card) would be appreciated.

     Thanks.

                         Kirk

If this flash card behaves anything like the flash card from a Cisco WLC-6 wireless controller, you need to get a flash card from someone's working voicemail unit and do a DD block copy in linux with the same exact size Cisco flash card. Then load your different version of software from there.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: