cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1118
Views
0
Helpful
6
Replies

how to make translation profile for 1 colling number and 1 called number?

Tagir Temirgaliyev
Spotlight
Spotlight

Hi all,

how to make translation profile for 1 calling number and 1 called number?

or is it possible to make 2 pots dial-peers having 1 voice port?

I want to try to make 1 pots dial-peer like .T and second as destination number  pattern 2111 which must be converted to 2110 only for 1 calling number

with regards,

2 Accepted Solutions

Accepted Solutions

Yes you can have multiple dialpeers with same voice-port.

View solution in original post

Easiest to do this on CUCM, But if you want to use CUBE then

voice translation-rule 1
rule 1 /2111/ /2110/

voice translation-profile 2
translate called 1

dial-peer voice 3200 voip

answer-address 3200

translation-profile incoming 2

dtmf-relay sip-notify rtp-nte

session protocol sipv2

codec xxx

!

dial-peer voice 2 pots
destination-pattern .T
port 1/1/0

View solution in original post

6 Replies 6

Yes you can have multiple dialpeers with same voice-port.

thanks Mohammed.

I will try

voice translation-rule 1
rule 1 /2111/ /2110/
!
voice translation-rule 2
rule 1 /3200/ /3200/
rule 2 // reject
!
voice translation-profile 2
translate calling 1
translate called 2

dial-peer voice 1 pots
destination-pattern 2111
translation-profile outgoing 2
port 1/1/0
dial-peer voice 2 pots
destination-pattern .T
port 1/1/0

so I hope this configuration will translate called number 2111 to 2110 only for calling number 3200 

and all athers will go to pots 2 without translation.

is it true?

Not really. Is this a CME or GW to CUCM? If CUCM what protocol is used. 

sip phone 3200 from CUCM - > sip to -> CUBE - > E1 voice port - > alcatel - analog phones 2111 and 2110 

Easiest to do this on CUCM, But if you want to use CUBE then

voice translation-rule 1
rule 1 /2111/ /2110/

voice translation-profile 2
translate called 1

dial-peer voice 3200 voip

answer-address 3200

translation-profile incoming 2

dtmf-relay sip-notify rtp-nte

session protocol sipv2

codec xxx

!

dial-peer voice 2 pots
destination-pattern .T
port 1/1/0

thanks Mohammed.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: