cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1586
Views
0
Helpful
17
Replies

how to MIGRATE from CUCM 7.1.5 to CUCM 8.6.2?

Sergey Balyura
Beginner
Beginner
Hi everyone! I have two CUCMs - CUCM 7.1.5 and CUCM 8.6.2 Both of them are on hardware platforms. CUCM 7.1.5 is in a production with bought licences. CUCM 8.6.2 is only installed without any configuration. But with bought licences already. So I need to MIGRATE from the 7.1.5 to 8.6.2 without the loss of data. All I've found is about the UPGRADE from 7.1.5 to 8.6.2 And this is not my case. I need the MIGRATE Please show me the right way of the migration, please :)
17 Replies 17

hi again!

 

well I could not export and import configs from 7.1.5 to 8.6.2 because of a huge amount of errors.

 

now I try to understand how I can upgrade my test CUCM 7.1.5 to 8.6.2

I tried to start the VM with 7.1.5 from the connected virtual DVD with bootable 8.6.2.

but it asks "do you want to rewrite the disk?"

and it's not what I want to do.

what is the right way of uprgrading from 7.1.5 to 8.6.2?

Hi, 

 

To upgrade on the same hardware, you do not boot from disk. The simplest way for you to proceed would be to insert the disk when CUCM is running, browse to CUCM OS Administration and navigate to Software Upgrades > Install/Upgrade.

 

There are several ways of performing the upgrade and recommend you review the below before proceeding.

 

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/upgrade/9_1_1/CUCM_BK_UAEC4331_00_upgrade-guide-cucm-91/CUCM_BK_UAEC4331_00_upgrade-guide-cucm-91_chapter_01.html

 

HTH

 

MonCov