12-15-2006 01:11 AM - edited 03-14-2019 07:14 PM
With CM, we can set busy trigger to 1 and 2nd call will receive busy trigger.
But with CME, how to set busy tone for 2nd call?
Thanks
Solved! Go to Solution.
12-15-2006 05:33 AM
If the ephone-dn is single line then your busy trigger is by default 1. You can set the busy trigger for a dual line ephone-dn by setting "huntstop channel."
PS: please remember to rate posts!
12-15-2006 05:33 AM
If the ephone-dn is single line then your busy trigger is by default 1. You can set the busy trigger for a dual line ephone-dn by setting "huntstop channel."
PS: please remember to rate posts!
12-17-2006 07:29 PM
I configure it for dual-line, because I need conference feature.
What is the different between 'huntstop' and huntstop channel'?
Should I enable 'huntstop channel' for each ephone-dn?
Is this correct configuration for feature that I need?
ephone-dn 1 dual-line
number 1050011 secondary 2306
label 1050011
description Kakanwil
name Kepala Kanwil
huntstop channel
!
Thx
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide