cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3192
Views
0
Helpful
6
Replies

i need know frequency on fxo trunk

haythmshawer
Level 1
Level 1

i have problem on fxo gateway

when i  make call out side on pstn the ip phone make connect direct and billing server make bill the call

i need know how to frequency on ksa

frquency ring out

frequency outside the mobile is close

frequency wrong number

frequency disconnect signal

1 Accepted Solution

Accepted Solutions

islam.kamal
Level 10
Level 10

Hello Haytham

1-Can you use the below link to get all required tones?.

http://www.3amsystems.com/wireline/tone-search.htm?


2- Please find the below :-

voice class custom-cptone STC

dualtone busy

  frequency 425 425

  cadence 500 500

dualtone ringback

  frequency 425 425

  cadence 1000 4000

dualtone reorder

  frequency 425 425

  cadence 250 250

dualtone out-of-service

  frequency 425 425 

  cadence 320 320

dualtone disconnect

  frequency 425 425

  cadence 500 500

!

voice-port 0/0/0

supervisory disconnect dualtone mid-call

supervisory custom-cptone STC

supervisory dualtone-detect-params 2

no battery-reversal

cptone SA

timeouts initial 5

timeouts interdigit 3

timeouts call-disconnect 3

timeouts ringing 5

timeouts wait-release 1

timing hookflash-out 50

timing guard-out 300

timing sup-disconnect 300

connection plar opx 8800

impedance complex2

caller-id enable

Thank you

Please rate all useful information

View solution in original post

6 Replies 6

islam.kamal
Level 10
Level 10

Hello Haytham

1-Can you use the below link to get all required tones?.

http://www.3amsystems.com/wireline/tone-search.htm?


2- Please find the below :-

voice class custom-cptone STC

dualtone busy

  frequency 425 425

  cadence 500 500

dualtone ringback

  frequency 425 425

  cadence 1000 4000

dualtone reorder

  frequency 425 425

  cadence 250 250

dualtone out-of-service

  frequency 425 425 

  cadence 320 320

dualtone disconnect

  frequency 425 425

  cadence 500 500

!

voice-port 0/0/0

supervisory disconnect dualtone mid-call

supervisory custom-cptone STC

supervisory dualtone-detect-params 2

no battery-reversal

cptone SA

timeouts initial 5

timeouts interdigit 3

timeouts call-disconnect 3

timeouts ringing 5

timeouts wait-release 1

timing hookflash-out 50

timing guard-out 300

timing sup-disconnect 300

connection plar opx 8800

impedance complex2

caller-id enable

Thank you

Please rate all useful information

Hi,

Try with fxo port empty configuration

add

cptone [your country]

It should work normall

You'll need frequency if you face fxo disconnect issue

Regards

Haitham

dear eng islam

thanks for help

when call come on router directly remove number 9 make connect direct same after change confiuration

if you found problem tell me

this configuration on router

!
! Last configuration change at 20:33:40 UTC Tue Oct 29 2013
version 15.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname voicegateway1
!
boot-start-marker
boot-end-marker
!
!
enable secret 5 $1$R/VE$zJggecBnCmnKxPqfgRvU71
!
no aaa new-model
!
no ipv6 cef
!
!
!
!
!
ip cef
multilink bundle-name authenticated
!
!
!
!
!
!
trunk group VIC2-4FXO
!
crypto pki token default removal timeout 0
!
!
voice-card 0
dspfarm
dsp services dspfarm
!
!
voice rtp send-recv
!
voice service voip
allow-connections h323 to h323
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none
h323
!
voice class codec 1
codec preference 1 g711alaw
codec preference 2 g711ulaw
codec preference 3 g729r8
codec preference 4 g729br8
!
voice class h323 1
  h225 timeout tcp establish 3
  h225 timeout setup 3
!
voice class custom-cptone STC
dualtone busy
  frequency 425 425
  cadence 500 500
dualtone ringback
  frequency 425 425
  cadence 1000 4000
dualtone reorder
  frequency 425 425
  cadence 250 250
dualtone out-of-service
  frequency 425 425
  cadence 320 320
dualtone disconnect
  frequency 425 425
  cadence 500 500
!
!
!
!
!
!
license udi pid CISCO2911/K9 sn FGL160610FE
hw-module pvdm 0/0
!
hw-module sm 1
!
!
!
!
redundancy
!
!
!
!
!
!
interface Embedded-Service-Engine0/0
no ip address
shutdown
!
interface GigabitEthernet0/0
no ip address
shutdown
duplex auto
speed auto
!
interface GigabitEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
interface GigabitEthernet0/2
description $ETH-LAN$$ETH-SW-LAUNCH$$INTF-INFO-GE 0/0$
ip address 172.16.12.3 255.255.252.0
duplex auto
speed auto
h323-gateway voip interface
h323-gateway voip bind srcaddr 172.16.12.3
!
interface Serial0/3/0
no ip address
shutdown
clock rate 2000000
!
interface Serial0/3/1
no ip address
shutdown
clock rate 2000000
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
!
ip route 0.0.0.0 0.0.0.0 172.16.12.254
!
!
!
!
control-plane
!
!
voice-port 0/0/0
trunk-group VIC2-4FXO
supervisory disconnect dualtone mid-call
supervisory custom-cptone STC
no battery-reversal
cptone SA
timeouts initial 5
timeouts interdigit 3
timeouts call-disconnect 3
timeouts ringing 5
timeouts wait-release 1
timing hookflash-out 50
timing guard-out 300
timing sup-disconnect 300
connection plar opx 8400
impedance complex2
description line 8187887
caller-id enable
caller-id alerting dsp-pre-allocate
!
voice-port 0/0/1
trunk-group VIC2-4FXO
supervisory disconnect dualtone mid-call
supervisory custom-cptone STC
no battery-reversal
cptone SA
timeouts initial 5
timeouts interdigit 3
timeouts call-disconnect 3
timeouts ringing 5
timeouts wait-release 1
timing hookflash-out 50
timing guard-out 300
timing sup-disconnect 300
connection plar opx 8400
impedance complex2
description line 8187778
caller-id enable
caller-id alerting dsp-pre-allocate
!
voice-port 0/0/2
trunk-group VIC2-4FXO
supervisory disconnect dualtone mid-call
supervisory custom-cptone STC
no battery-reversal
cptone SA
timeouts initial 5
timeouts interdigit 3
timeouts call-disconnect 3
timeouts ringing 5
timeouts wait-release 1
timing hookflash-out 50
timing guard-out 300
timing sup-disconnect 300
connection plar opx 8400
impedance complex2
description line 8187777
caller-id enable
!
voice-port 0/0/3
trunk-group VIC2-4FXO
supervisory disconnect dualtone mid-call
supervisory custom-cptone STC
no battery-reversal
cptone SA
timeouts initial 5
timeouts interdigit 3
timeouts call-disconnect 3
timeouts ringing 5
timeouts wait-release 1
timing hookflash-out 50
timing guard-out 300
timing sup-disconnect 300
connection plar opx 8400
impedance complex2
description line 8189001
caller-id enable
caller-id alerting dsp-pre-allocate
!
voice-port 0/1/0
trunk-group VIC2-4FXO
supervisory disconnect dualtone mid-call
supervisory custom-cptone STC
no battery-reversal
cptone SA
timeouts initial 5
timeouts interdigit 3
timeouts call-disconnect 3
timeouts ringing 5
timeouts wait-release 1
timing hookflash-out 50
timing guard-out 300
timing sup-disconnect 300
connection plar opx 8400
impedance complex2
description line 8189009
caller-id enable
caller-id alerting dsp-pre-allocate
!
voice-port 0/1/1
trunk-group VIC2-4FXO
supervisory disconnect dualtone mid-call
supervisory custom-cptone STC
no battery-reversal
cptone SA
timeouts initial 5
timeouts interdigit 3
timeouts call-disconnect 3
timeouts ringing 5
timeouts wait-release 1
timing hookflash-out 50
timing guard-out 300
timing sup-disconnect 300
connection plar opx 8400
impedance complex2
description line 8188007
caller-id enable
caller-id alerting dsp-pre-allocate
!
voice-port 0/1/2
trunk-group VIC2-4FXO
supervisory disconnect dualtone mid-call
supervisory custom-cptone STC
no battery-reversal
cptone SA
timeouts initial 5
timeouts interdigit 3
timeouts call-disconnect 3
timeouts ringing 5
timeouts wait-release 1
timing hookflash-out 50
timing guard-out 300
timing sup-disconnect 300
connection plar opx 8400
impedance complex2
description line 8188006
caller-id enable
!
voice-port 0/1/3
trunk-group VIC2-4FXO
supervisory disconnect dualtone mid-call
supervisory custom-cptone STC
no battery-reversal
cptone SA
timeouts initial 5
timeouts interdigit 3
timeouts call-disconnect 3
timeouts ringing 5
timeouts wait-release 1
timing hookflash-out 50
timing guard-out 300
timing sup-disconnect 300
connection plar opx 8400
impedance complex2
description line 8188004
caller-id enable
caller-id alerting dsp-pre-allocate
!
voice-port 0/2/0
trunk-group VIC2-4FXO
supervisory disconnect dualtone mid-call
supervisory custom-cptone STC
no battery-reversal
cptone SA
timeouts initial 5
timeouts interdigit 3
timeouts call-disconnect 3
timeouts ringing 5
timeouts wait-release 1
timing hookflash-out 50
timing guard-out 300
timing sup-disconnect 300
connection plar opx 8400
impedance complex2
description line 8188002
caller-id enable
caller-id alerting dsp-pre-allocate
!
voice-port 0/2/1
trunk-group VIC2-4FXO
supervisory disconnect dualtone mid-call
supervisory custom-cptone STC
no battery-reversal
cptone SA
timeouts initial 5
timeouts interdigit 3
timeouts call-disconnect 3
timeouts ringing 5
timeouts wait-release 1
timing hookflash-out 50
timing guard-out 300
timing sup-disconnect 300
connection plar opx 8400
impedance complex2
caller-id enable
caller-id alerting dsp-pre-allocate
!
voice-port 0/2/2
trunk-group VIC2-4FXO
supervisory disconnect dualtone mid-call
supervisory custom-cptone STC
no battery-reversal
cptone SA
timeouts initial 5
timeouts interdigit 3
timeouts call-disconnect 3
timeouts ringing 5
timeouts wait-release 1
timing hookflash-out 50
timing guard-out 300
timing sup-disconnect 300
connection plar opx 8400
impedance complex2
caller-id enable
!
voice-port 0/2/3
trunk-group VIC2-4FXO
supervisory disconnect dualtone mid-call
supervisory custom-cptone STC
no battery-reversal
cptone SA
timeouts initial 5
timeouts interdigit 3
timeouts call-disconnect 3
timeouts ringing 5
timeouts wait-release 1
timing hookflash-out 50
timing guard-out 300
timing sup-disconnect 300
connection plar opx 8400
impedance complex2
caller-id enable
caller-id alerting dsp-pre-allocate
!
voice-port 1/0/0
!
voice-port 1/0/1
!
voice-port 1/0/2
!
voice-port 1/0/3
!
voice-port 1/0/4
!
voice-port 1/0/5
!
voice-port 1/0/6
!
voice-port 1/0/7
!
voice-port 1/0/8
trunk-group VIC2-4FXO
supervisory disconnect dualtone mid-call
supervisory custom-cptone STC
no battery-reversal
cptone SA
timeouts initial 5
timeouts interdigit 3
timeouts call-disconnect 3
timeouts ringing 5
timeouts wait-release 1
timing hookflash-out 50
timing guard-out 300
timing sup-disconnect 300
connection plar opx 8400
impedance complex2
caller-id enable
caller-id alerting dsp-pre-allocate
!
voice-port 1/0/9
!
voice-port 1/0/10
!
voice-port 1/0/11
!
voice-port 1/0/12
!
voice-port 1/0/13
!
voice-port 1/0/16
!
voice-port 1/0/17
!
voice-port 1/0/18
!
voice-port 1/0/19
!
voice-port 1/0/20
!
voice-port 1/0/21
!
!
!
!
!
!
mgcp profile default
!
!
dial-peer voice 3 voip
description Local extensions
preference 1
destination-pattern ....
session target ipv4:172.16.12.11
voice-class codec 1 
voice-class h323 1
dtmf-relay h245-alphanumeric
no vad
!
dial-peer voice 4 voip
description Local extensions
destination-pattern ....
session target ipv4:172.16.12.12
voice-class codec 1 
voice-class h323 1
dtmf-relay h245-alphanumeric
no vad
!
dial-peer voice 51 pots
trunkgroup VIC2-4FXO
destination-pattern 9[2-8]......
forward-digits 7
!
dial-peer voice 52 pots
trunkgroup VIC2-4FXO
destination-pattern 90[123467].......
forward-digits 10
!
dial-peer voice 53 pots
trunkgroup VIC2-4FXO
destination-pattern 905........
forward-digits 10
!
dial-peer voice 54 pots
trunkgroup VIC2-4FXO
destination-pattern 800.......
forward-digits 10
!
dial-peer voice 55 pots
trunkgroup VIC2-4FXO
destination-pattern 9200.....
forward-digits 9
!
dial-peer voice 56 pots
trunkgroup VIC2-4FXO
destination-pattern 99..
forward-digits 3
!
dial-peer voice 57 pots
trunkgroup VIC2-4FXO
destination-pattern 00T
no digit-strip
forward-digits all
!
!
gateway
!
!
!
gatekeeper
shutdown
!
!
!
line con 0
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line vty 0 4
password terminal
login
transport input all
!
scheduler allocate 20000 1000
!

eng islam

supervisory dualtone-detect-params 2

order not complete

i need order

voice class dualtone-detect-params 2

Robert Thomas
Level 7
Level 7

I would try the cptone suggestion for your country. If that doesn't work you might need to do a PCM capture and listen to it in audacity to extract the exact frequencies, although it's rarely needed.

Making the World a better place, one call at a time.

haythmshawer
Level 1
Level 1

eng islam

order is working

but frequency out-off service not correct