cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2750
Views
5
Helpful
17
Replies

ILS/GDPR

Leonardo Santana
Spotlight
Spotlight

Hello,

 

I running a CUCM Lab with CUCM version System version: 11.5.1.14900-11, i cannot dial the +E.164 Alternalte Number, at the learned numbers i see the DNs of the other cluster but i unable to dial them.

 

Regards

 

Leonardo Santana

Regards
Leonardo Santana

*** Rate All Helpful Responses***
17 Replies 17

Hello,

I made all the configurations mentioned in this doc.

 

CSS configured at the IP Phone and on SIP TRUNK.

 

image.png

Learned Numbers:

 

image.png

The result of the DNA made on CUCM Spoke Cluster

  • Results Summary
    • Calling Party Information
    • Dialed Digits = 7498
    • Match Result = BlockThisPattern
    • Route Block Cause = Unallocated Number
    • Called Party Number = 7498
    • Time Zone = Etc/GMT
    • Outside Dial Tone = NO
  • Call Flow
    • Note: Information Not Available
  • Alternate Matches
    • Note: Information Not Available

Regards

 

Leonardo Santana

Regards
Leonardo Santana

*** Rate All Helpful Responses***

Also check that the appropriate CSSes contains the partitions for the learned patterns as indicated in "Partitions for Learned Numbers and Patterns".

I already check this, the partitions and css are assigned to the calling device.

Regards
Leonardo Santana

*** Rate All Helpful Responses***