Improving the conference

[Jean Lofrano]

Hi Voice team,

I can to do conference just between 4 internal users..

How can I to improve my solution? I want to do conference with 8 internal users....

I need more PVDM?   

I´m using a 2821 to manage the codecs in a conference. 

sccp local GigabitEthernet0/0.20

sccp ccm 172.20.1.106 identifier 1 priority 1 version 4.1

sccp

!

sccp ccm group 1

description *** config para conferencia ***

bind interface GigabitEthernet0/0.20

associate ccm 1 priority 1

associate profile 7 register XCODER

!

dspfarm profile 7 transcode

codec g711ulaw

codec g711alaw

codec g729ar8

codec g729abr8

codec g729r8

codec g729br8

maximum sessions 2

associate application SCCP

NAME: "2821 chassis", DESCR: "2821 chassis"
PID: CISCO2821         , VID: V01 , SN: FTX0919A01F

NAME: "WAN Interface Card - Serial 2T", DESCR: "WAN Interface Card - Serial 2T"
PID: WIC-2T=           , VID: 1.0, SN: 28425856

NAME: "One port E1 voice interface daughtercard", DESCR: "One port E1 voice interface daughtercard"
PID: VWIC-1MFT-E1=     , VID: 1.0, SN: 30225314

NAME: "PVDMII DSP SIMM with four DSPs", DESCR: "PVDMII DSP SIMM with four DSPs"
PID: PVDM2-64          , VID: V01 , SN: FOC130410QS

NAME: "PVDMII DSP SIMM with four DSPs", DESCR: "PVDMII DSP SIMM with four DSPs"
PID: PVDM2-64          , VID: V01 , SN: FOC12510WCM

NAME: "Virtual Private Network (VPN) Module", DESCR: "Encryption AIM Element"
PID: AIM-VPN/EPII-PLUS , VID:   NA, SN: FOC09111HEJ

NAME: "NM-SE", DESCR: "NM-SE"
PID: NM-CUE            , VID: V03, SN: FOC120137RY

NAME: "40GB IDE Disc Daughter Card", DESCR: "40GB IDE Disc Daughter Card"
PID:                   , VID: 1.0, SN: FOC115265SW

[Aaron Harrison]

CME? CUCM?

[Jean Lofrano]

CUCM..software conference...

[Chris Deren · Accepted solution]

Change the "MaxAdHocConference" and "MaxMeetMe Conference" CUCM service parameters to 8, by default they are set to 4.

HTH,

Chris

[Jean Lofrano]

Thanks Chris.

I have another doubt:

- My environment is:

CUCM (software bridge) and transcode on the local VG < > WAN < > CME conference

How Can I to improve the number of the conference participants between the sites?

thanks

[Chris Deren]

What do you want to improve?  The parameter you changed apply to all conferences initiated from CUCM side, if you want to allow more than 3 participants for conferences initiated on CME side you need to use hardware bridge on CME as the software CME bridge is limited to only 3 participants.

HTH,

Chris

[Rob Huffman]

Hi Jean,

Just to add a note to the great tips from Chris, check out this excellent doc from Tony @ Cisco

https://supportforums.cisco.com/docs/DOC-9464

Cheers!

Rob