in Cisco IP Phone web page, why there is no date on "debug display" under "Device Logs"?

Oak Ridge · ‎07-15-2015

    12:32:58p 10: Name=SEPxxxxxxxxxxxxxx Load= 9.3(1SR2.1S) Last=TCP-timeout
   12:34:00p 14: Name=SEPxxxxxxxxxxxxxx Load= 9.3(1SR2.1S) Last=UCM-closed-TCP
   2:31:29p 10: Name=SEPxxxxxxxxxxxxxx Load= 9.3(1SR2.1S) Last=TCP-timeout
   6:04:11p 23: Name=SEPxxxxxxxxxxxxxx Load= 9.3(1SR2.1S) Last=Reset-Restart
   1:16:27a 10: Name=SEPxxxxxxxxxxxxxx Load= 9.3(1SR2.1S) Last=TCP-timeout
   1:16:30a 9: Name=SEPxxxxxxxxxxxxxx Load= 9.3(1SR2.1S) TFTP Error
   1:16:31a 23: Name=SEPxxxxxxxxxxxxxx Load= 9.3(1SR2.1S) Last=Reset-Restart
   8:30:22a 10: Name=SEPxxxxxxxxxxxxxx Load= 9.3(1SR2.1S) Last=TCP-timeout
   8:30:26a 9: Name=SEPxxxxxxxxxxxxxx Load= 9.3(1SR2.1S) TFTP Error
   8:30:26a 23: Name=SEPxxxxxxxxxxxxxx Load= 9.3(1SR2.1S) Last=Reset-Restart
   9:33:40p 22: Name=SEPxxxxxxxxxxxxxx Load= 9.3(1SR2.1S) Last=Reset-Reset
   1:59:53a 25: Name=SEPxxxxxxxxxxxxxx Load= 9.3(1SR2.1S) Last=Initialized
   10:39:16p 10: Name=SEPxxxxxxxxxxxxxx Load= 9.3(1SR2.1S) Last=TCP-timeout
   10:46:38p 10: Name=SEPxxxxxxxxxxxxxx Load= 9.3(1SR2.1S) Last=TCP-timeout
   10:46:45p 23: Name=SEPxxxxxxxxxxxxxx Load= 9.3(1SR2.1S) Last=Reset-Restart
   1:37:51p 10: Name=SEPxxxxxxxxxxxxxx Load= 9.3(1SR2.1S) Last=TCP-timeout
   1:37:59p 9: Name=SEPxxxxxxxxxxxxxx Load= 9.3(1SR2.1S) TFTP Error
   1:37:59p 23: Name=SEPxxxxxxxxxxxxxx Load= 9.3(1SR2.1S) Last=Reset-Restart

see the above example. No way to identify which day it happened.

Manish Gogna · ‎07-15-2015

Hi Oak,

This is working as designed. I check in my lab setup on a couple of different cucm versions, the date is not displayed in these logs.

Manish

- Do rate helpful posts -