10-12-2012 02:29 PM - edited 03-16-2019 01:40 PM
Hi all,
I am having an issue with inbound SIP calls connecting very slowly. After a call is initiated, it can take anywhere from 10-15 seconds to connect. In the IPIP Gateway (3845 Version 12.4(24)T6), I see the call hit immediately but I am getting a SIP 408 request timeout message after my gateway opens the RTP port and sends the invite. After the timeout, I see the ACK sent and the call proceeds normally. I have attached a debug highlighting what I'm describing. Any help with this would be greatly appreciated and please let me know if additional information is required.
Thanks in advance!
Don
Solved! Go to Solution.
10-13-2012 04:23 AM
Please add a new trace with "debug voip dialpeer" and "debug ccsip all".
Regards.
10-13-2012 04:23 AM
Please add a new trace with "debug voip dialpeer" and "debug ccsip all".
Regards.
10-15-2012 09:15 AM
It was a dial-peer issue... Thanks for pointing me in the right direction!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide