Hi all,
System : CISCO2911
IOS Version: c2900-universalk9-mz.SPA.157-3.M3.bin
USE : CME
I configured a sip Inbound Dial peer with Multi tenant.
voice class tenant 2
registrar 1 dns:fpbx.de expires 3600
credentials username xxxxx password 7 xxxxx realm fpbx.de
authentication username xxxxx password 7 xxxx realm fpbx.de
no remote-party-id
timers buffer-invite 10000
sip-server dns:fpbx.de
host-registrar
no pass-thru content custom-sdp
on
dial-peer voice 2 voip
translation-profile incoming Test
session protocol sipv2
session target dns:fpbx.de
incoming called-number xxxxxxxxxxxx
voice-class sip profiles 1
voice-class sip tenant 2
dtmf-relay rtp-nte
codec g711ulaw
i use an Voice Translation Profile to change the called number from the Trunknumber to an internal Number of an ephone-dn.
Like : xxxx to xx so the System can direct select the right user.
The Call works in and outbound.
But when i call from external i see in the Phone display the calling Number twice.
From "External Number" to (External Number).
With a translation Profile for the calling Number i can remove the "To" Part of the Display. That seems very Strange because i manipulating the calling Number not the called Number.
My Traget : the Number is displayed "+49" but i need "00049" oder "00"
What i am doing wrong ?
kind Regards
Philipp