03-18-2014 03:08 PM - edited 03-16-2019 10:09 PM
Hi All,
There are lot of discussions on the forum regarding the "caller ID not displaying" problem. One of the post suggested to enable "caller-id alerting dsp-pre-allocate" with which i am now able to see the calling party number in the debug vpm signal logs.
My joy short lived when i noted the incoming call still shows UNKNOWN NUMBER in the 7941 ip phone. I need your expert suggestion to crack this issue. Please can someone help me to troubleshoot what is causing the calling ID not showing in the phone when its getting in VG. Thanks !
Call flow :
7941---SCCP----CUCM---h323---1751VG----FXO--Incoming call
CUCM - 6.0.1.2000-3
IOS - 12.4(25d)
attached the sh run, debug logs and cucm logs(call reference -27224684)
03-18-2014 03:24 PM
03-24-2014 01:56 PM
The issues got fixed
The debug vpm signal shows the ANI received with CC91xxxxxxxxxxD.
With voice translation rule removed CC and ending D. The IP phone now displays the calling number.
rule i used - /^\(CC\)\(............\)\D/ /\2/
Hope some day it might help others....
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide