01-08-2009 01:55 AM - edited 03-15-2019 03:23 PM
Dear Friends
I have an issue with my ip phones, i want all the phones (5) to ring when the call lends at the router. can any one please help me with this, the system is working fine just wanna resolved the above issue. There are four 7912 phone and one 7940 phone
Cheers
Aamir
01-08-2009 04:40 AM
Hi Amir
You should probably mention if you're using Communications Manager or Communications Manager Express and what version of it.
Regards
Stefan
01-10-2009 08:06 PM
Hi Stefan
Sorry for the delay in replying, Its communication manager express version 4.0
Cheers
Aamir
01-10-2009 08:50 PM
Hi Aamir
Looks like you want a shared line or overlaid DN.
You need to assign the same ephone-DN on all the ephones.
ephone-dn 1
number 1000
ephone 1
button 1:1
|
ephone 2
button 1:1
|
|
|
ephone 5
button 1:1
You might get more help from this link:
Regards
Pedro
01-11-2009 12:46 AM
Hi Aamir,
It's not quite like that. You can see the configuration guide for CME 4.0 shared lines will utilize a number of overlaid. Note that each DN will only have 2 channels, so for 5 lines you will want to use more than one DN like the example that Pedro provided. If you want each user to be able to have 2 lines ( in this case a maximum of 10) you will want to configure 5 dual line DNs.
Something like this will help;
hth,
nick
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide