Incorrect time on CME phone display.

[Karthikeyan Damodaran]

Incorrect time on  CME phone display

.

[paolo bevilacqua]

This is asked very often, have you tried searching before asking ?

[Karthikeyan Damodaran]

Yes, I did creating cnf files under telephony services and  then reset all phones. it doesnt worked out.

please assist me on this.

[paolo bevilacqua]

Maybe if you could take the time to read in full from the search results, as indicated above that would help you better.

[Karthikeyan Damodaran]

under the telephony-service -

no create cnf-files

create cnf-files

Then reboot the individual phones

Whether above one is solution

[Rob Huffman]

Hi Karthikeyan,

Try the steps in this doc (pay special attention to Time Zone & phone model type)

Troubleshooting Incorrect Time Stamp on IP Phones in Cisco Unified CME

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/troubleshooting/guide/ts_time.html#wp1053981

Cheers!

Rob

[Karthikeyan Damodaran]

telephony-service

sdspfarm conference mute-on 111 mute-off 222

sdspfarm units 2

sdspfarm tag 1 conferenceprof

sdspfarm tag 2 transcodeprof

conference hardware

no auto-reg-ephone

authentication credential admin cisco

max-ephones 110

max-dn 200

ip source-address 10.231.2.5 port 2000

max-redirect 20

service phone settingsAccess 1

timeouts ringing 60000

system message Nielsen - Chennai

url services http:///voiceview/common/login.do

url authentication http:///voiceview/authentication/authenticate.do 

load 7942 SCCP42.8-4-2S.loads

load 7962 SCCP42.8-4-2S.loads

time-zone 39

time-format 24

date-format dd-mm-yy

voicemail 2100

max-conferences 8 gain -6

call-forward pattern .T

call-forward system redirecting-expanded

hunt-group logout HLog

moh music-on-hold.au

web admin system name admin password cisco

dn-webedit

time-webedit

transfer-system full-consult

transfer-pattern .T

secondary-dialtone 0

directory entry 1 555 name HelpDesk

create cnf-files version-stamp 7960 Feb 02 2012 07:56:02

I reset all phones ,. still am not getting correct timing on all phones. phone type : 7942

[BILLY NUGIER]

Did you ever get this resolved?  If so what was the resolution?

[islam.kamal]

Hello

you can configure as below and it will help

router# clock   (type your date and time)

router (config)# clock tomezone (name) (x)

router(config)# clock summer-time 

telephony -service
 time-zone X
time-format 24
date-format dd-mm-yy
no Create-cnf
create-cnf
Thank you

please rate if this will help

[Emmanuel Valdez]

Hi, I have the same issue, I could resolved it pointing to a NTP server because my clock on CME was incorrect. What is your IOS version? Regards.

[Claudio Quiroz Cabello]

I had the same problem too and I solved it as follow:

router(config)# clock timezone zone hours-offset

router(config-telephony)# clock time-zone number