cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1093
Views
0
Helpful
3
Replies

increase voice volume in a PRI interface

connect101
Level 1
Level 1

Hello,

I want to increase the output volume of my voice ports.

How can I do?

I don't know realy how to use the

"output attenuation"

and the "input gain".

In which case I will use the first, and when I will use the second?

Thank you

3 Replies 3

Brandon Buffin
VIP Alumni
VIP Alumni

If you're having a problem with volume for outgoing calls, it could be a problem with the PRI configuration. Can you post the output of "show controllers T1"?

Brandon

I Think my configuration is correct but i give the result here :

E1 0/0/0 is up.

Applique type is Channelized E1 - balanced

Description: voix

No alarms detected.

alarm-trigger is not set

Version info Firmware: 20070320, FPGA: 20, spm_count = 0

Framing is NO-CRC4, Line Code is HDB3, Clock Source is Line.

CRC Threshold is 320. Reported from firmware is 320.

Data in current interval (458 seconds elapsed):

0 Line Code Violations, 0 Path Code Violations

0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins

0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs

Total Data (last 24 hours)

0 Line Code Violations, 0 Path Code Violations,

0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins,

0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs

E1 0/0/1 is up.

Applique type is Channelized E1 - balanced

Description: Second Ligne Voix

No alarms detected.

alarm-trigger is not set

Version info Firmware: 20070320, FPGA: 20, spm_count = 0

Framing is NO-CRC4, Line Code is HDB3, Clock Source is Line.

CRC Threshold is 320. Reported from firmware is 320.

Data in current interval (459 seconds elapsed):

0 Line Code Violations, 0 Path Code Violations

0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins

0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs

Total Data (last 24 hours)

0 Line Code Violations, 0 Path Code Violations,

0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins,

0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs

E1 0/2/0 is up.

Applique type is Channelized E1 - balanced

Description: 3e E1

No alarms detected.

alarm-trigger is not set

Version info Firmware: 20070320, FPGA: 20, spm_count = 0

Framing is NO-CRC4, Line Code is HDB3, Clock Source is Line.

CRC Threshold is 320. Reported from firmware is 320.

Data in current interval (464 seconds elapsed):

0 Line Code Violations, 0 Path Code Violations

0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins

0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs

Total Data (last 24 hours)

0 Line Code Violations, 0 Path Code Violations,

0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins,

0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs

E1 0/2/1 is up.

Applique type is Channelized E1 - balanced

Description: 4e E1

No alarms detected.

alarm-trigger is not set

Version info Firmware: 20070320, FPGA: 20, spm_count = 0

Framing is NO-CRC4, Line Code is HDB3, Clock Source is Line.

CRC Threshold is 320. Reported from firmware is 320.

Data in current interval (465 seconds elapsed):

0 Line Code Violations, 0 Path Code Violations

0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins

0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs

Total Data (last 24 hours)

0 Line Code Violations, 0 Path Code Violations,

0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins,

0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs

connect101
Level 1
Level 1

My second problem is that the called person hear a little echo.

This is the port configuration :

voice-port 0/0/0:15

echo-cancel coverage 32

echo-cancel mode 2

cptone FR

description VOICEPORT PSTN 2

bearer-cap Speech

!

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: