InRoom Gotomeeting and SX10

[Jean Paul Enerst]

Hi Gents,

i Hope one of you can give me a hand here... Our System is completely work, i can dial SIP uri from sx10 to webex CMR via Expressway. Now i  was tasked to get the sx10 to access meeting via Inroom feature of gotomeeting. The problem is format for meeting as it's  9 digits meetingID@67.217.95.2 for instance 123456789@67.217.95.2

Problem is when the call gets to CUCM, cucm does not know what to do with it.

Now, i am thinking to get a new URi such XXXXXXXXX@67.217.95.2 then pointed/send call coming on that format to expressway.

Any other suggestion?

Thanks guys,

[Jean Paul Enerst · Accepted solution]

Thanks guys... Quick update here, a SIP route pattern pointed to Expressway-C has done the job.

[Adam Pawlowski]

I built this as a domain pattern (gotomeeting.dial) to send to expressway since g2m is H323. Works great if you have pro. Same for Zoom meetings.