cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
12708
Views
10
Helpful
29
Replies

Interconnection CME with Panasonic KX-TDE 600

Hi to all

We have one CME and one Panasonic KX-TDE 600.we need to integrate these PBX via H323 or via SIP protocol

From my site(CME) i have created one dial peer like the below

i think that we this we are ok from our site right?

Do you know anything about Panasonic site?

its asked me A credentials for the sip but we dont use any credential for the sip trunking, dial peer on CME

FOR THE SIP PART

dial-peer voice 19 voip

destination-pattern 1..

session protocol sipv2

session target ipv4:192.168.10.1

dtmf-relay sip-notify

codec g711ulaw

no vad

FOR THE H323 PART

dial-peer voice 21 voip

destination-pattern 1...

session target ipv4:192.168.10.1

dtmf-relay h245-alphanumeric

REGARDS

Please rate all useful posts Regards Chrysostomos ""The Most Successful People Are Those Who Are Good At Plan B""
29 Replies 29