IP Communicator on VMWare Fusion not working

[ltrinh]

I install & config IP Communicator 8.6.4.0 on VMWare Fusion 8.0.1 Running Win 7- the softphone register to TFTP server & seem like every thing working.

But when I make a phone call no sound (voice) come from the other side.  Only outbound traffic no inbound traffic.  Some one please help how to make it work?

[D_Lebedev]

Cisco IP Communicator is not supported in VMWare

[Chris Deren]

Couple of things to check.

Check Windows firewall settings

Run the Fusion in bridged networking mode instead of NAT as NAT will cause one way audio issues.

[ltrinh]

Hi Chris,

Thank you for your respond.  After I change Fusion to bridge mode the VPN not work & the phone no longer register.  Phone will register in NAT mode.  Any suggestion?

[gopi.udayakumar]

Hi Chris,

May be your reply is back to 2015 and i am posting my comments on Jan 2019.

Your suggestion from changing the Network setting in fusion from NAT to Bridge worked.

I have tried multiple options before searching google. Thank you again. on office network it worked. Let me check by connecting to VPN.

Hopefully it should work.

Regards,

Gopinath U.