I hav tried to upgrade firmware from SCCP to SIP (non supported CUCM) in my 7940g. First i have done factory restored the device and tried to uplode the SIP firmware to it by using tftpd32. IP is assigned to my deivce from tftpd32 DHCP and then i was in the state "Phone Provisioning". Can anybody please help me on this iisue.
best way to troubleshoot this is to get the pcaps from the phone. we can use the span to PC option of the Phone or we can span the switchport, to which the phone is connected so that we can see the file its is requesting and to which server it is requesting.
Please check this link also if you have followed all the steps for this.
i have seen these messages in my tftp server log viewer. Please check once below.
Connection received from 192.168.1.1 on port 50643 [31/03 19:52:54.691] Read request for file <SIP001E7A26BBD5.cnf>. Mode octet [31/03 19:52:54.691] File <SIP001E7A26BBD5.cnf> : error 2 in system call CreateFile The system cannot find the file specified. [31/03 19:52:54.691]
How to integrate Cisco Meeting Server with Wowza Media Server for Live streaming step by step and how to stream a meeting to youtube from Wowza Media Server.Cisco Meeting Server Integration with Wowza Media Server for Live Streaming How to Send a st...
Hi, How to enter /input Alphanumeric as DTMF in IVR; does CVP/Call studio has any mechanism /inbuilt element or logic to recognize Alphabets?We got a new requirement that loan number will have first character as alphabets;for A123456;B123...
All Info from userid1run sql select * from enduser where userid='userid1'
userid selective info for multiple usersrun sql select eu.userid,eu.islocaluser,eu.status, eu.mailid, eu.directoryuri, dpc.name as ad_filter from enduser eu left join direct...
New update of Cisco Meeting Server book with Streamer and Scheduler components, the book will cover the following:certificates requirements, clustering, dial plan with call flow, WebRTC, WebBridge3, CallBridge, recorder, streamer, scheduler, NAT Traversal...