09-08-2015 06:35 AM - edited 03-17-2019 04:15 AM
Please , I have installed cucm 10 , and i insert ip phone into by using BAT, my worry is about how can i change the language of ip phone??
thank you.
Solved! Go to Solution.
09-10-2015 09:31 AM
Hi there,
You're going to want the full CUCM Locale Installer. There is nice discussion on the differences in this Cisco Dockwiki;
http://docwiki.cisco.com/wiki/Cucm-phone-locale-installers
You didn't mention your exact 10.x CUCM version, but if it were 10.5.2 for example the file would be;
cm-locale-fr_FR-10.5.2.2000-1.cop.sgn
From this path on Cisco software downloads;
09-08-2015 08:34 AM
You can do that via BAT, exactly what problem are you having?
09-09-2015 05:57 AM
You can download the locale files from CCO and upload it via the OS admin.
06-19-2016 04:42 AM
good morninger Avery one,
Is There a solution to make a sauvegarde of system in case of problème ?
09-08-2015 01:03 PM
Have you uploaded Locale to Call Manager after the installations. May i know what language you want to enable on the phone. If you already Uploaded Locale you need to change on phone page and end user page of the user.
09-09-2015 12:46 AM
I just installed cucm version 10, and I insert ip phones by using BAT, they are properly registered, now i need to change the language of ip phone to french.
when i try to create user with user locale ,i have english, United States only.
how can i upload locale ???
09-09-2015 07:29 AM
Hi Labanelamia,
Please find below link for how to upload the locale in call manager
http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-communications-manager-version-71/113395-cucm-locale-nl-00.html
Please rate this if you find this is useful information.
09-10-2015 08:36 AM
hi karunakar454
Please, i have to download Cisco Unified Communications Manager Locale Installer or Unified Communications Manager Endpoints Locale Installer for 7962G and 7861?
thanks.
09-10-2015 09:31 AM
Hi there,
You're going to want the full CUCM Locale Installer. There is nice discussion on the differences in this Cisco Dockwiki;
http://docwiki.cisco.com/wiki/Cucm-phone-locale-installers
You didn't mention your exact 10.x CUCM version, but if it were 10.5.2 for example the file would be;
cm-locale-fr_FR-10.5.2.2000-1.cop.sgn
From this path on Cisco software downloads;
06-19-2016 04:42 AM
good morninger Avery one,
Is There a solution to make a sauvegarde of system in case of problème ?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide