cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

AMA-CUCM Troubleshooting: Best Practices for Reading Trace Files

827
Views
5
Helpful
2
Replies
Beginner

IP Phone LSC certificate installation

Hi guys

We are going to deploy dot1x access with LSC certificate for our IP Phones and since we are talking about more than 400 phones  we are thinking about a bulk procedure to install them.

Is there a way to check if LSC installation has been deployed well and if LSC is installed on phones directly from the CUCM?

From the documentation I only found the way to check it from the IP phone menu

Thanks and regards

Marco

2 REPLIES 2
Highlighted
Beginner

Page 117 of the attached..

"Generate CAPF report" Page 117 of the attached..

 

Hope this helps.

 

Greg

Beginner

Also if you are deploying 802

Also if you are deploying 802.1X you might find this community document of great interest.

https://supportforums.cisco.com/document/73611/ip-phone-security-and-ctl-certificate-trust-list

 

Also consider Supplicant Link State Changes on the IP phones Switch Port, another great document attached.

 

Good luck with your project.

Greg

 

 

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards