cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
80
Views
0
Helpful
3
Replies
Highlighted
Beginner

IP Phone Registeration Best Pratctice

Hello all ,

My company have an implementation this week for 8 companies all in the same cluster on BE6M :-

No. of Phones 400 distributed on all companies and every company will use a separated extension range for example :-

1000-1099

1100-1199 ans so on

so I can't use the auto registration  method because every company must have from its own range so I can't make an auto registration from 1000-1399.

they  also have 400 DIDs as a 1 to 1 mapping so what is the best practice to configure phones and DIDs much faster ?

3 REPLIES 3
Highlighted
Cisco Employee

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/bat/10_0_1/CUCM_BK_CDB9A6A4_00_cucm-bulk-administration-guide-100/CUCM_BK_CDB9A6A4_00_cucm-bulk-administration-guide-100_chapter_0111.html

Regards

Deepak

Highlighted

Hi ,

you can apply 2 methods here. 

1- Bulk configuration tool.

2- enable the auto configuration in phases. Like, enable to auto config on the server for 

Range1 1000-1100 with device pool and all other things. connect all the phones

and then disable the auto registration or change the range and connect the 2nd set and next set. 

Highlighted
Hall of Fame Cisco Employee

Well, that's not necessarily true, you can configure a different auto-reg range, per server.

FYI, you need to mention what version you're working with when asking here.

If 11.x, you can use self-provisioning.

HTH

java

if this helps, please rate