08-17-2010 10:29 PM - edited 03-16-2019 12:18 AM
Hi,
I have test lab with one router 1861 and four IP phone 7942 which are connected to switchport on router 1861.I have implemented with SCCP that time it was working fine but when I configured with SIP firmware cmterm-7942_7962-sip.8-5-3SR1.zip , all phones are automatically rebooting continously.
I have attached details about configuration of 1861 and flash output.
It would be greatful to get the correct solution.
08-18-2010 02:20 AM
Do not use SIP on phones, it is lacking features and it is buggy.
Use SCCP only.
02-02-2011 03:55 PM
Hello,
Based on this link:
Note For all SIP firmware upgrades from firmware release versions earlier than 8.3(3) to version 8.5(3) or greater, you must first upgrade your firmware to version 8.5(2). Once you have upgraded to version 8.5(2), you can upgrade your IP Phone to version 8.5(3) or later.
02-03-2011 02:33 AM
Can you follow the steps in
https://supportforums.cisco.com/thread/2065734?tstart=0
HTH
PS:Rate useful posts
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide