Unfortunately jabber for IPhone and Android are not yet supported on CUCME.
There was a Jabber Voice application for both platform that worked (and still works) with CUCME...
unfortunately it has been removed from app store and Play Store.
After your comments, I also noticed the same. Do you mean Jabber on mobile platform is still supported with CME but not available on respective market for download?
Jabber Voice is still an option on CME 10.5 as voice register pool type but not downloadable from any store.
the problem is also with ios 9 on iphones released few days ago, the jabber voice also stopped working, i was wonderinbif there is a way to make the jabber app to work with cucme or is there any 3rd party app we can use?
I just checked and you are right, with IOS9 it stopped working :(
Have you tried 3CX phone?
Let me know
Ok for the CME I tested a 3rd party softphone for IPhone named Join and for Android I used CSIPSimple and they are working fine.
For CUCM I tested the Jabber Phone only mode and its working.
I am passing for the same issue of the topic. I saw that you are using the Join SIP Client for Iphone and it works fine! I have tried the to use this software with CME but I didn´t have success. Please you share your configs of CME and the options used on Join SIP Client?
Here what you need.
voice register global
source-address x.x.x.x port 5060 (x.x.x.x is your router interface ip address)
authenticate realm all
voice register dn 1
name Your displayed name
label line name
voice register pool 1
id mac 0000.1234.5678
number 1 dn 1
username cisco password cisco
*******Join Client Side*****
Auth. Unsername: cisco
Domain: Your router IP Address
Port: leave unchanged
Hope this helps
Its now registering, but I am seeing some errors to make externals calls. But internals calls is the most important at this momment for me.
Thank you very much!
Glad That Helped :)
You can post the output of a debug ccsip message while calling outbound so I can help you further.
Please rate useful posts and mark as answered the one that solves your issue.
That will help others with same problem