ANNOUNCEMENT - The community will be down for maintenace this Thursday August 13 from 12:00 AM PT to 02:00 AM PT. As a precaution save your work.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
629
Views
0
Helpful
3
Replies
Highlighted
Beginner

is it possible to have CUBE generate ringback tone ?

is it possible to have CUBE generate ringback for all inbound calls regardless of whether the call manager behind it can generate ringback tone or not ? if yes how to configure CUBE to do so without disabling early media 180.

thanks

3 REPLIES 3
Highlighted
Hall of Fame Master

Re: is it possible to have CUBE generate ringback tone ?

The short answer is no, normally CUBE doesn't have DSP resources, and even if it has them, an IP to IP calls doesn;t use them.

No DSP == No tone detection/generation.

However, if you the call flow goes thoutgh a TCL/IVR script, then it can be possible to play prompts to simulate ringback, or whatever you want.

Highlighted
Beginner

is it possible to have CUBE generate ringback tone ?

paolo,

thank you for your response, it would be highly appreciated if you can let me know how to do this on the cube with a TCL script.

Highlighted
Hall of Fame Master

is it possible to have CUBE generate ringback tone ?

If you want to write TCL/IVR script by yourself (not easy), you can read the documentation

http://www.cisco.com/en/US/docs/ios/voice/tcl/developer/guide/tclivrv2.html

Please post further questions on the subjet to to http://developer.cisco.com forums.

This widget could not be displayed.